Page 5 of 6

Re: Telepítés, frissítés, beépülő modulok, testreszabás

Posted: Mon Jan 25, 2021 10:45 am
by Berci
Sziasztok! Valamiért üres nekem az "Addon manager"


OS: Ubuntu 20.04.1 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.4.
Build type: Release
Python version: 3.8.2
Qt version: 5.12.5
Coin version: 4.0.0
OCC version: 7.3.0
Locale: Hungarian/Hungary (hu_HU)

Re: Telepítés, frissítés, beépülő modulok, testreszabás

Posted: Thu Nov 25, 2021 7:35 am
by nagylaca73
Sziasztok!

Inventor 2017 alatt dolgoztam eddig. Most bontogatom a szárnyaimat FreeCaddel. Megy is a dolog, de amit nem sikerül azt addig csinálom ameddig össze jön.
Viszont Sheet Metal funkcióban picit tanácstalan vagyok... Az elkészített rajzot kiterítem, de nagyon más méret jön ki.
Gondolom valahol állítani kell valamit, de nem igazán találom. Inventorral készített terítékhez képest plusz 3 mm-el nagyobb a teríték. Ez meg így nem megfelelő, ugyanis az élhajlítóknak kiadva nem jön össze az alkatrész.
Valaki tudna esetleg segíteni ebben?

Re: Telepítés, frissítés, beépülő modulok, testreszabás

Posted: Thu Nov 25, 2021 9:13 pm
by Shalmeneser
nagylaca73 wrote: Thu Nov 25, 2021 7:35 am ...
File ?

Re: Telepítés, frissítés, beépülő modulok, testreszabás

Posted: Fri Nov 26, 2021 9:53 am
by nagylaca73
Csatoltam.
Inventor szerint (0,44 K-faktor) 116,524 mm-nek kell lennie a hajtott oldalon ha ki van terítve. Ez az élhajlítónak is megfelelő.
FreeCadben 0-ás K-faktorral 119,142. Ha a K-faktort emelem, emelkedik a hossz, tehát az nem jó.

Re: Telepítés, frissítés, beépülő modulok, testreszabás

Posted: Fri Nov 26, 2021 9:49 pm
by Shalmeneser
...

Re: Telepítés, frissítés, beépülő modulok, testreszabás

Posted: Sat Nov 27, 2021 11:14 am
by nagylaca73
I see there is a problem, but what is the problem? I want to find out!

Re: Telepítés, frissítés, beépülő modulok, testreszabás

Posted: Wed Dec 29, 2021 11:15 am
by onesz
The problem about the above included file is the following:

"According to Inventor (0.44 K-factor), it should be 116.524 mm on the driven side if it is spread out. This is also suitable for the bender machine.
FreeCadben with K-factor 0 119,142. If I raise the K-factor, the length rises, so that's not good."

hope it helps to understand.

Re: Telepítés, frissítés, beépülő modulok, testreszabás

Posted: Wed Jan 05, 2022 3:38 am
by Berci
Ajaj! Megint eltűnt az AddonManager. Tud valaki segíteni?

04:30:50 During initialization the error "cannot import name 'QtNetwork' from 'PySide2' (/usr/lib/python3/dist-packages/PySide2/__init__.py)" occurred in /usr/share/freecad-daily/Mod/AddonManager/InitGui.py
04:30:50 Please look into the log file for further information
04:31:00 Unknown command 'Std_AddonMgr'

OS: Ubuntu 20.04.3 LTS (ubuntu:GNOME/ubuntu)
Word size of FreeCAD: 64-bit
Version: 0.20.
Build type: Release
Branch: unknown
Hash: 472c09cd09a02209e1179d25e0a727db5d374ebb
Python version: 3.8.10
Qt version: 5.12.8
Coin version: 4.0.0
OCC version: 7.5.2
Locale: Hungarian/Hungary (hu_HU)

Re: Telepítés, frissítés, beépülő modulok, testreszabás

Posted: Wed Jan 05, 2022 11:17 am
by onesz
@Berci

Python függőség miatt nem mködik, javítás alatt van:
https://forum.freecadweb.org/viewtopic. ... er#p559098

Re: Telepítés, frissítés, beépülő modulok, testreszabás

Posted: Wed Jan 19, 2022 9:13 pm
by Zolko
Berci wrote: Wed Jan 05, 2022 3:38 am Ajaj! Megint eltűnt az AddonManager. Tud valaki segíteni?

Code: Select all

04:30:50  During initialization the error "cannot import name 'QtNetwork' from 'PySide2' (/usr/lib/python3/dist-packages/PySide2/__init__.py)" occurred in /usr/share/freecad-daily/Mod/AddonManager/InitGui.py
04:30:50  Please look into the log file for further information
04:31:00  Unknown command 'Std_AddonMgr'
velem is történt, nézd itt a megoldást: https://forum.freecadweb.org/viewtopic. ... 65#p563165