Can't rotate body in Assembly
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Can't rotate body in Assembly
OS: Windows 10 Version 2009
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24291 (Git)
Build type: Release
Branch: releases/FreeCAD-0-19
Hash: 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/New Zealand (en_NZ)
Assembly4
I want to rotate this Drive Pillar clockwise to parallel the Idler Pillar at the back None of the Axis Controls in Attachment has any effect.
What am I misunderstanding?
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24291 (Git)
Build type: Release
Branch: releases/FreeCAD-0-19
Hash: 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/New Zealand (en_NZ)
Assembly4
I want to rotate this Drive Pillar clockwise to parallel the Idler Pillar at the back None of the Axis Controls in Attachment has any effect.
What am I misunderstanding?
- Attachments
-
- PR-02-Parts.FCStd
- (829.18 KiB) Downloaded 31 times
-
- PR-02-000.FCStd
- (7.32 KiB) Downloaded 27 times
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
Re: Can't rotate body in Assembly
Assembly items move by their LCS.
Re: Can't rotate body in Assembly
They should shift with Attachment parameters.
Check out the Attachment Parameters for Idler Pillar PR-02-008
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
Re: Can't rotate body in Assembly
Moved from Help forum.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Can't rotate body in Assembly
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
- thomas-neemann
- Veteran
- Posts: 11801
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Can't rotate body in Assembly
I can't open it correctly. can you upload these two files?
Code: Select all
PR-01-Parts.FCStd' does not exist
PR-03-Parts.FCStd' does not exist
Re: Can't rotate body in Assembly
Assembly https://1drv.ms/u/s!ArMxdUYEh9fKwCjw0bV ... s?e=mDaukN
Parts https://1drv.ms/u/s!ArMxdUYEh9fKwClJqrk ... f?e=Yavp0v
Parts https://1drv.ms/u/s!ArMxdUYEh9fKwClJqrk ... f?e=Yavp0v
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
- thomas-neemann
- Veteran
- Posts: 11801
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Can't rotate body in Assembly
For some reason the files downloaded onto my machine as *.FCStd1
When I knock off the '1' all is well
When I knock off the '1' all is well
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
- thomas-neemann
- Veteran
- Posts: 11801
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Can't rotate body in Assembly
I did that too. but these files are probably missing
PR-01-Parts.FCStd
PR-03-Parts.FCStd