As we know, when Parts, Bodies, Sketches, Planes are going to be created in Assembly4, a name is requested before their creation.
After creation, Parts and Bodies have their respective LCSs.
In the case of Sketches, LCS, Plans, Axes... attachments are requested.
Beyond any workarounds, I think Part Design WB should have these features as part of it.
Features Request: Toggle "Assembly4 mode" in Part Design WB
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
Features Request: Toggle "Assembly4 mode" in Part Design WB
I have uploaded many FreeCAD video tutorials to my YouTube channel
- adrianinsaval
- Veteran
- Posts: 5551
- Joined: Thu Apr 05, 2018 5:15 pm
Re: Features Request: Toggle "Assembly4 mode" in Part Design WB
you mean you want to be asked for a name every time you create an object?
Re: Features Request: Toggle "Assembly4 mode" in Part Design WB
Yep, but beside this, to:
- have LCSs included in Parts and Bodies and
- to be able to select the more references for Sketches to be attached to, (appart from XY, XZ and YZ planes)
I have uploaded many FreeCAD video tutorials to my YouTube channel
- adrianinsaval
- Veteran
- Posts: 5551
- Joined: Thu Apr 05, 2018 5:15 pm
Re: Features Request: Toggle "Assembly4 mode" in Part Design WB
They already have the origin object
With this I agree, there's already a couple of discussions requesting this and I think a github issue too.to be able to select the more references for Sketches to be attached to, (appart from XY, XZ and YZ planes)
Re: Features Request: Toggle "Assembly4 mode" in Part Design WB
Yes, but they do not have an "LCS object", as the ones created with the corresponding tool, which is IMHO very useful.
adrianinsaval wrote: ↑Fri Aug 05, 2022 7:36 pmWith this I agree, there's already a couple of discussions requesting this and I think a github issue too.to be able to select the more references for Sketches to be attached to, (appart from XY, XZ and YZ planes)
I have uploaded many FreeCAD video tutorials to my YouTube channel
Re: Features Request: Toggle "Assembly4 mode" in Part Design WB
Probably because LCS is a concept of Assembly4 WB?
if is true adding to the std Part Design WB will make a preference over an Assembly WB out the many available.
I think this will lead also on some retrocompatibility issue that usually are not adressed by WB creator.
And probably if there is already a discussion about similar things it is not as plain as it could seems at a first glance.
Regards
Carlo D.
if is true adding to the std Part Design WB will make a preference over an Assembly WB out the many available.
I think this will lead also on some retrocompatibility issue that usually are not adressed by WB creator.
And probably if there is already a discussion about similar things it is not as plain as it could seems at a first glance.
Regards
Carlo D.
GitHub page: https://github.com/onekk/freecad-doc.
- In deep articles on FreeCAD.
- Learning how to model with scripting.
- Various other stuffs.
Blog: https://okkmkblog.wordpress.com/
- In deep articles on FreeCAD.
- Learning how to model with scripting.
- Various other stuffs.
Blog: https://okkmkblog.wordpress.com/