Almost a lockup, big delay and weird Pad.

[freedman]

I don't know why someone would do this, but maybe they would. Start a new doc and sketch on XY plane. Sketch a regular polygon (from 0,0) and then select the reference polygon outer circle (blue) and do a ""toggle construction" command, then Pad the sketch. I attached a pic of what I got, there are some weird plane pads.

If I pad the hex first and then go back and edit the sketch (like above) I get a lockup.

Maybe this is a symptom of something.

Code: Select all

OS: Windows 10 (10.0)
Word size of FreeCAD: 64-bit
Version: 0.20.28936 (Git)
Build type: Release
Branch: master
Hash: b02705d79f
Python 3.8.13, Qt 5.12.9, Coin 4.0.0, OCC 7.5.3
Locale: English/United States (en_US)

[user1234]

If I pad the hex first and then go back and edit the sketch (like above) I get a lockup.

Weird result, yes, lockup, no. Even i want to edit it.

Greetings
user1234

[chrisb]

I don't know why someone would do this, but maybe they would. Start a new doc and sketch on XY plane. Sketch a regular polygon (from 0,0) and then select the reference polygon outer circle (blue) and do a ""toggle construction" command, then Pad the sketch. I attached a pic of what I got, there are some weird plane pads.

Please add the offending file.

[freedman]

I was thinking it is so simple to create, but what if you can't create it... By the way my system locked up 3 times trying to recreate the file.

[chrisb]

No T-junctions, no crossings for sketches which should be padded!

[freedman]

No T-junctions, no crossings for sketches which should be padded!

I know that for sure, tell FreeCAD, I didn't draw anything.

It's odd, the contrainsts are in place but no matter what value I set the Deviation I can always zoom in to see overlap. I expected the vertexes to be coincident and get a no-solids error. No big deal really.