In v.18, the SpaceMouse cannot change the view until I click in the view windowpane. This is very tedious, particularly when doing tasks such as adding numerous edges for a fillet or chamfer.
Steps to reproduce
- OpenFreeCad 0.18
- Press the "create new document" button
- Click to select the "Unnamed" document tree in the Combo View / Model
- Attempt to rotate the view using the SpaceMouse
- Notice that the X/Y/Z axis rotation indicator and NavCube are not moving; the SpaceMouse has no effect
- OpenFreeCad 0.17
- Press the "create new document" button
- Click to select the "Unnamed" document tree in the Combo View / Model
- Attempt to rotate the view using the SpaceMouse
- Notice that the X/Y/Z axis rotation indicator DOES move in response to the SpaceMouse
OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16110 (Git)
Build type: Release
Branch: (HEAD detached at upstream/releases/FreeCAD-0-18)
Hash: f7dccfaa909e5b9da26bf50c4a22ccca9bb10c40
Python version: 3.6.6
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
FreeCAD version 0.17 information
OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.13528 (Git)
Build type: Release
Branch: releases/FreeCAD-0-17
Hash: 5c3f7bf8ec51e2c7187789f7edba71a7aa82a88b
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: English/UnitedStates (en_US)
Neither the Python nor the Report consoles seem to have anything relevant to say. I have attached log files for each version, though I didn't see anything particularly informative there.
Thank you for your time and consideration.