Info: project commented under LinkBranch.

Report observations made with the new Toponaming branch.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
User avatar
jpg87
Posts: 809
Joined: Thu Mar 16, 2017 7:16 am
Location: Limoges - France
Contact:

Info: project commented under LinkBranch.

Post by jpg87 »

Hello,
Following the article https://forum.freecad.org/viewtopic.php ... 83a8c09407
I decided to make a series of documents to show workflows to reinforce the toponaming problem already well advanced in LinkBranch by @realthunder .
Here are the pieces I drew and I am writing the comments and illustrations :
debutAssInc.png
debutAssInc.png (190.99 KiB) Viewed 4356 times
eclateCarters.png
eclateCarters.png (181.11 KiB) Viewed 4356 times

Edit : Sorry, I forgot to put the links!


http://help-freecad-jpg87.fr/05_excomment_ind.php

http://help-freecad-jpg87.fr/00fr/05_excomment_ind.php
My website : http://help-freecad-jpg87.fr updated 2023/11/06
User avatar
jpg87
Posts: 809
Joined: Thu Mar 16, 2017 7:16 am
Location: Limoges - France
Contact:

Re: Info: project commented under LinkBranch.

Post by jpg87 »

Videos of left and right crankcases are available :

http://help-freecad-jpg87.fr/0501a_excomment_ind.php

http://help-freecad-jpg87.fr/0501b_excomment_ind.php

and in french

http://help-freecad-jpg87.fr/00fr/0501a ... nt_ind.php

http://help-freecad-jpg87.fr/00fr/0501b ... nt_ind.php

You will find in these examples :
  • uses of master sketches independent of part bodies with import of geometries,
  • carbon copies of some of these sketches (requiring to use the key combination Ctrl + Alt in addition),
  • the use of Sub-object face binder to transfer common geometries from one part to another,
  • imports of directly extrudable geometries ...
Last edited by jpg87 on Tue Aug 02, 2022 5:44 am, edited 1 time in total.
My website : http://help-freecad-jpg87.fr updated 2023/11/06
numanair
Posts: 4
Joined: Sun Feb 20, 2022 5:03 am

Re: Info: project commented under LinkBranch.

Post by numanair »

Good stuff. Thanks!

With step "Form of revolution around the motor shaft" and "Ribs of the central fabric of the casing on the motor shaft side", why not use the same reference plane for revolving as drawing the rib? I have not been following this model closely, so I am not sure which sketches were created first, but it seems that it would be more parametric this way (as it removes the 50mm plane offset).

Edit: your French links in the last post are broken.
User avatar
jpg87
Posts: 809
Joined: Thu Mar 16, 2017 7:16 am
Location: Limoges - France
Contact:

Re: Info: project commented under LinkBranch.

Post by jpg87 »

numanair wrote: Mon Aug 01, 2022 7:38 pm Good stuff. Thanks!
Thanks, it's always fun!

numanair wrote: Mon Aug 01, 2022 7:38 pm With step "Form of revolution around the motor shaft" and "Ribs of the central fabric of the casing on the motor shaft side", why not use the same reference plane for revolving as drawing the rib? I have not been following this model closely, so I am not sure which sketches were created first, but it seems that it would be more parametric this way (as it removes the 50mm plane offset).
Perfectly accurate! This is because I used images from the technical documents I had. I didn't ask myself any more questions...

numanair wrote: Mon Aug 01, 2022 7:38 pm Edit: your French links in the last post are broken.
Thanks for pointing it out, it's fixed: I had absentmindedly copied the links from my local tests.
My website : http://help-freecad-jpg87.fr updated 2023/11/06
User avatar
jpg87
Posts: 809
Joined: Thu Mar 16, 2017 7:16 am
Location: Limoges - France
Contact:

Re: Info: project commented under LinkBranch.

Post by jpg87 »

Always for information, I added comments of construction for :

culasse1.png
culasse1.png (65.97 KiB) Viewed 3602 times
culasse2.png
culasse2.png (91.77 KiB) Viewed 3602 times

https://help-freecad-jpg87.fr/0501f_excomment_ind.php

https://help-freecad-jpg87.fr/00fr/0501 ... nt_ind.php


... and for fillet resolution

booleennes.png
booleennes.png (119.95 KiB) Viewed 3602 times

https://help-freecad-jpg87.fr/0501g_excomment_ind.php

https://help-freecad-jpg87.fr/00fr/0501 ... nt_ind.php
My website : http://help-freecad-jpg87.fr updated 2023/11/06
User avatar
jpg87
Posts: 809
Joined: Thu Mar 16, 2017 7:16 am
Location: Limoges - France
Contact:

Re: Info: project commented under LinkBranch.

Post by jpg87 »

My website : http://help-freecad-jpg87.fr updated 2023/11/06
Post Reply