Hello,
Following the article https://forum.freecad.org/viewtopic.php ... 83a8c09407
I decided to make a series of documents to show workflows to reinforce the toponaming problem already well advanced in LinkBranch by @realthunder .
Here are the pieces I drew and I am writing the comments and illustrations :
Edit : Sorry, I forgot to put the links!
http://help-freecad-jpg87.fr/05_excomment_ind.php
http://help-freecad-jpg87.fr/00fr/05_excomment_ind.php
Info: project commented under LinkBranch.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Info: project commented under LinkBranch.
My website : http://help-freecad-jpg87.fr updated 2023/11/06
Re: Info: project commented under LinkBranch.
Videos of left and right crankcases are available :
http://help-freecad-jpg87.fr/0501a_excomment_ind.php
http://help-freecad-jpg87.fr/0501b_excomment_ind.php
and in french
http://help-freecad-jpg87.fr/00fr/0501a ... nt_ind.php
http://help-freecad-jpg87.fr/00fr/0501b ... nt_ind.php
You will find in these examples :
http://help-freecad-jpg87.fr/0501a_excomment_ind.php
http://help-freecad-jpg87.fr/0501b_excomment_ind.php
and in french
http://help-freecad-jpg87.fr/00fr/0501a ... nt_ind.php
http://help-freecad-jpg87.fr/00fr/0501b ... nt_ind.php
You will find in these examples :
- uses of master sketches independent of part bodies with import of geometries,
- carbon copies of some of these sketches (requiring to use the key combination Ctrl + Alt in addition),
- the use of Sub-object face binder to transfer common geometries from one part to another,
- imports of directly extrudable geometries ...
Last edited by jpg87 on Tue Aug 02, 2022 5:44 am, edited 1 time in total.
My website : http://help-freecad-jpg87.fr updated 2023/11/06
Re: Info: project commented under LinkBranch.
Good stuff. Thanks!
With step "Form of revolution around the motor shaft" and "Ribs of the central fabric of the casing on the motor shaft side", why not use the same reference plane for revolving as drawing the rib? I have not been following this model closely, so I am not sure which sketches were created first, but it seems that it would be more parametric this way (as it removes the 50mm plane offset).
Edit: your French links in the last post are broken.
With step "Form of revolution around the motor shaft" and "Ribs of the central fabric of the casing on the motor shaft side", why not use the same reference plane for revolving as drawing the rib? I have not been following this model closely, so I am not sure which sketches were created first, but it seems that it would be more parametric this way (as it removes the 50mm plane offset).
Edit: your French links in the last post are broken.
Re: Info: project commented under LinkBranch.
Thanks, it's always fun!
Perfectly accurate! This is because I used images from the technical documents I had. I didn't ask myself any more questions...numanair wrote: ↑Mon Aug 01, 2022 7:38 pm With step "Form of revolution around the motor shaft" and "Ribs of the central fabric of the casing on the motor shaft side", why not use the same reference plane for revolving as drawing the rib? I have not been following this model closely, so I am not sure which sketches were created first, but it seems that it would be more parametric this way (as it removes the 50mm plane offset).
Thanks for pointing it out, it's fixed: I had absentmindedly copied the links from my local tests.
My website : http://help-freecad-jpg87.fr updated 2023/11/06
Re: Info: project commented under LinkBranch.
Always for information, I added comments of construction for :
https://help-freecad-jpg87.fr/0501f_excomment_ind.php
https://help-freecad-jpg87.fr/00fr/0501 ... nt_ind.php
... and for fillet resolution
https://help-freecad-jpg87.fr/0501g_excomment_ind.php
https://help-freecad-jpg87.fr/00fr/0501 ... nt_ind.php
https://help-freecad-jpg87.fr/0501f_excomment_ind.php
https://help-freecad-jpg87.fr/00fr/0501 ... nt_ind.php
... and for fillet resolution
https://help-freecad-jpg87.fr/0501g_excomment_ind.php
https://help-freecad-jpg87.fr/00fr/0501 ... nt_ind.php
My website : http://help-freecad-jpg87.fr updated 2023/11/06
Re: Info: project commented under LinkBranch.
Some comments on the construction of the 1st part of the frame
https://help-freecad-jpg87.fr/051_excomment_ind.php
https://help-freecad-jpg87.fr/00fr/051_ ... nt_ind.php
https://help-freecad-jpg87.fr/051_excomment_ind.php
https://help-freecad-jpg87.fr/00fr/051_ ... nt_ind.php
My website : http://help-freecad-jpg87.fr updated 2023/11/06