FreeCAD Forum

Posted: **Tue May 31, 2022 5:14 am**

First error is clear to see. Thinks "CirclePos" constraint is "A1" constraint... A restart solved the problem. Had to restart twice in a day so not that uncommon an error.

: FreeCADLink_ctZQPU9M0K.png (8 KiB) Viewed 905 times

: FreeCADLink_3D7LLAus5F.png (7.14 KiB) Viewed 905 times

: FreeCADLink_Nc3OBBvjPC.png (51.57 KiB) Viewed 905 times

Second error I'm assuming is related is where there were 2 length dimensions. Both linked to the same spreadsheet cell B3 value. One dimension had a name "L1" -- left over from earlier versions. This I assume is what was causing an error where updating the cell "broke" the sketch and saw this error. Updating B3 didn't work.

: NjkaB1fHTE.png (8.65 KiB) Viewed 905 times

No it's couldn't recreate the error in another document with same sketch.

Think error was introduced in Linkdaily and error persists in main branch versions.

Code: Select all

OS: Windows 10 Version 2009
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 2022.430.28641 (Git)
Build type: Release
Branch: LinkStage3
Hash: a77045488092c24ece25d63c91f362cbd2181d36
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English

Posted: **Tue May 31, 2022 9:12 pm**

File? This type of things simple cannot be verified or debugged without an example file or clear instructions to reproduce.

Posted: **Thu Jun 02, 2022 8:51 am**

adrianinsaval wrote: ↑Tue May 31, 2022 9:12 pm File? This type of things simple cannot be verified or debugged without an example file or clear instructions to reproduce.

May I correct you? "cannot be verified or debugged without an example file AND clear instructions to reproduce".

Posted: **Thu Jun 02, 2022 9:36 pm**

I had this bug too :

Create a sketch with
- a dimension depending a named one in the same sketch
- some geometric constraints
delete a constraint and create a new one
-> Expression switch from the unamed dimension to the named one and create a cyclic dependency

Replace equality by parallelism cause the bug

: Capture d’écran_2022-06-02_23-32-21.png (15.13 KiB) Viewed 686 times

sketch_bug.FCStd: (4.29 KiB) Downloaded 34 times

KO:

Code: Select all

OS: Ubuntu Core 20 (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 2022.531.14555 (Git shallow)
Build type: Release
Branch: (HEAD detached at 2022.05.31-edge)
Hash: 36367cecc18492fec00ee01ecb2214c79a326f76
Python version: 3.8.10
Qt version: 5.15.3
Coin version: 4.0.1
OCC version: 7.6.2
Locale: French/France (fr_FR)

OK:

Code: Select all

OS: Ubuntu 22.04 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 0.20.
Build type: Release
Branch: unknown
Hash: 3f04bf7b4d99723809d04237002496e88aa26ed3
Python 3.10.4, Qt 5.15.3, Coin 4.0.0, OCC 7.5.1
Locale: French/France (fr_FR)

FreeCAD Forum

Named dimension related bug

Named dimension related bug

Re: Named dimension related bug

Re: Named dimension related bug

Re: Named dimension related bug