Collection of differences between original master version and realthunder

Report observations made with the new Toponaming branch.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Collection of differences between original master version and realthunder

Post by thomas-neemann »

bambuko wrote: Thu Apr 21, 2022 7:25 am doesn't always work that well, but on a whole Linkstage3 branch copes better with such TNP issues!

BTW now that we have dedicated forum section, this thread should be moved there:
That's how I see it too, thanks
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
chrisb
Veteran
Posts: 53920
Joined: Tue Mar 17, 2015 9:14 am

Re: Collection of differences between original master version and realthunder

Post by chrisb »

Done.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Collection of differences between original master version and realthunder

Post by thomas-neemann »

thomas-neemann wrote: Thu Oct 28, 2021 6:49 pm this bar can be switched off in realthunder.
...
Bildschirmfoto_2022-04-24_21-50-08.png
Bildschirmfoto_2022-04-24_21-50-08.png (48.68 KiB) Viewed 2516 times




in the master you can still not switch it off (via the tick)

OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 0.20.28751 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 660655e)
Hash: 660655e54c97b5017ff0ac1e030059308cd4e3f5
Python 3.9.12, Qt 5.12.9, Coin 4.0.0, OCC 7.5.3
Locale: German/Germany (de_DE)
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Collection of differences between original master version and realthunder

Post by thomas-neemann »

apparently contraints in assembly3 in master are not working properly





https://www.youtube.com/watch?v=Se-tMzkKaj4

phpBB [video]







realthunder

OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 2022.430.26244 +4758 (Git) AppImage
Build type: Release
Branch: LinkDaily
Hash: b024b876480a533018fdc702145e9e38f8c54ba6
Python version: 3.9.12
Qt version: 5.12.9
Coin version: 4.0.1
OCC version: 7.5.3
Locale: German/Germany (de_DE)






master


OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 0.20.28765 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 795f86c)
Hash: 795f86c18c22260cfc3627bdd5b71504b9dca4ef
Python 3.9.12, Qt 5.12.9, Coin 4.0.0, OCC 7.5.3
Locale: German/Germany (de_DE)



edit

the difference is that auto recompute is pre-set in realthunder. not in the master
Last edited by thomas-neemann on Mon May 02, 2022 12:49 pm, edited 1 time in total.
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
bambuko
Veteran
Posts: 2161
Joined: Thu Oct 24, 2019 12:53 pm
Location: UK, England, North Devon

Re: Collection of differences between original master version and realthunder

Post by bambuko »

thomas-neemann wrote: Mon May 02, 2022 8:14 am ...https://www.youtube.com/watch?v=Se-tMzkKaj4...
I refuse to look at Youtube without at least some indication in writing, here in the forum, as to what am I supposed to expect to see there.... :twisted:
I am using Link branch and Assembly3
you can also download ... and try it here
excellent Assembly3 tutorials here
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Collection of differences between original master version and realthunder

Post by thomas-neemann »

bambuko wrote: Mon May 02, 2022 9:43 am

I refuse to look at Youtube without at least some indication in writing, here in the forum, as to what am I supposed to expect to see there.... :twisted:
the connection is not fixed in the master, in realthunder you cannot disconnect it with transform
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
bambuko
Veteran
Posts: 2161
Joined: Thu Oct 24, 2019 12:53 pm
Location: UK, England, North Devon

Re: Collection of differences between original master version and realthunder

Post by bambuko »

thomas-neemann wrote: Mon May 02, 2022 9:59 am the connection is not fixed in the master, in realthunder you cannot disconnect it with transform
Are you using standard transform (https://wiki.freecadweb.org/Std_TransformManip) ??
BTW there is (and I was there some time ago as well :lol: ) a lot of confusion about using standard transform after constraining assemblies.

from @realthunder:
It is not possible to use the Transform command for moving assemblies, because assembly mover is aware of assembly hierarchies and will modify the the Placement property of the correct assembly/part object in the hierarchy, while the Transform command only works for the selected object.
see: https://github.com/realthunder/FreeCAD_ ... -835246489

Have you got "auto recompute" set on in both Link and Master? - doesn't look like it to me?

This video doesn't prove a lot.... and most certainly not that:
"...assembly3 in master are not working properly..."

It looks to me more like user error ;)
I am using Link branch and Assembly3
you can also download ... and try it here
excellent Assembly3 tutorials here
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Collection of differences between original master version and realthunder

Post by thomas-neemann »

bambuko wrote: Mon May 02, 2022 12:20 pm ...
Have you got "auto recompute" ...


Thanks for the tip, that's the solution. the difference is that auto recompute is pre-set in realthunder. not in the master.
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Collection of differences between original master version and realthunder

Post by thomas-neemann »

this hotkey has probably changed.

Bildschirmfoto_2022-05-03_10-17-07.png
Bildschirmfoto_2022-05-03_10-17-07.png (7.42 KiB) Viewed 2259 times
source: https://wiki.freecadweb.org/Sandbox:Key ... _Workbench


in realthunder it is as described in the documentation. in the master it is still the old method


OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 0.20.28774 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 716213b)
Hash: 716213beacd25a907f2c164ad8ef8309b8a284b0
Python 3.9.12, Qt 5.12.9, Coin 4.0.0, OCC 7.5.3
Locale: German/Germany (de_DE)

OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 2022.430.26244 +4758 (Git) AppImage
Build type: Release
Branch: LinkDaily
Hash: b024b876480a533018fdc702145e9e38f8c54ba6
Python version: 3.9.12
Qt version: 5.12.9
Coin version: 4.0.1
OCC version: 7.5.3
Locale: German/Germany (de_DE)
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
User avatar
thomas-neemann
Veteran
Posts: 11801
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE 🇩🇪
Contact:

Re: Collection of differences between original master version and realthunder

Post by thomas-neemann »

master has .57 point cloud import. realthunder doesn't have it

edit .e57
Last edited by thomas-neemann on Fri May 06, 2022 12:53 pm, edited 1 time in total.
Gruß Dipl.-Ing. (FH) Thomas Neemann

https://www.youtube.com/@thomasneemann5 ... ry=freecad
Post Reply