skecher绘制的时候两条重叠的线怎么自动让软件视为一条线？
Posted: Thu Oct 01, 2020 1:56 pm
草图本来就是在一个平面上的，重叠的线自然应该视为同一条，没想到freecad竟然不会自己合并，请问需要在哪里设置吗？
我沒有用中文界面，草圖 是 Draft 嗎? [EDIT] 題目寫了是Sketcher
把檔案上載 比較容易明白問題...
FreeCAD Forum
The help and development forum of FreeCAD
https://forum.freecad.org/
skecher绘制的时候两条重叠的线怎么自动让软件视为一条线？
Page 1 of 1
Re: skecher绘制的时候两条重叠的线怎么自动让软件视为一条线？
Posted: Thu Oct 01, 2020 3:40 pm
Re: skecher绘制的时候两条重叠的线怎么自动让软件视为一条线？
Posted: Tue Jun 21, 2022 8:24 am
把两条线的端点都加重合约束呢？
Re: skecher绘制的时候两条重叠的线怎么自动让软件视为一条线？
Posted: Wed Jun 22, 2022 2:48 pm
A sketch has different uses :
* for a following pad
* for a path
* as master sketch to show all the important lines.
Sometime you could want 2 lines partially at the same place (but not for a pad).
Sketcher_ValidateSketch can help you sometime to find 'errors'.
* for a following pad
* for a path
* as master sketch to show all the important lines.
Sometime you could want 2 lines partially at the same place (but not for a pad).
Sketcher_ValidateSketch can help you sometime to find 'errors'.