Stable parametric model of a bridge, export as ifc in the bim process for the structural engineer

This forum section is only for IFC-related issues
Post Reply
User avatar
thomas-neemann
Veteran
Posts: 6617
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE

Stable parametric model of a bridge, export as ifc in the bim process for the structural engineer

Post by thomas-neemann »

Bildschirmfoto_2022-05-26_15-06-35.png
Bildschirmfoto_2022-05-26_15-06-35.png (377.96 KiB) Viewed 319 times
1120-fin.FCStd
(16.58 KiB) Downloaded 9 times
1120-fin.ifc
(7.82 KiB) Downloaded 9 times

making of video

https://forum.freecadweb.org/viewtopic. ... 25#p597575
ich biete freecad online-support an, als mini-job
VHS Freecad Webseminare Herbst 2022
https://www.vhs-lingen.de/programm/beru ... 011#inhalt
https://www.vhs-lingen.de/programm/beru ... 012#inhalt
User avatar
yorik
Founder
Posts: 12865
Joined: Tue Feb 17, 2009 9:16 pm
Location: Brussels
Contact:

Re: Stable parametric model of a bridge, export as ifc in the bim process for the structural engineer

Post by yorik »

Very cool! At some point I'd like to have a kind of back-and-forth workflow between proper volumetric structural objects and wire diagram... So you could model with, say, your design intent, export the wire schema for structural calculation, then adapt back your design instantly or even automatically
User avatar
thomas-neemann
Veteran
Posts: 6617
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE

Re: Stable parametric model of a bridge, export as ifc in the bim process for the structural engineer

Post by thomas-neemann »

yorik wrote: Fri May 27, 2022 9:52 am
yes, that is already partly possible with your frame

https://www.youtube.com/watch?v=p7o6Zxh9rmk

phpBB [video]
ich biete freecad online-support an, als mini-job
VHS Freecad Webseminare Herbst 2022
https://www.vhs-lingen.de/programm/beru ... 011#inhalt
https://www.vhs-lingen.de/programm/beru ... 012#inhalt
Post Reply