Meshing with CfdOF

A subforum specific to the development of the OpenFoam-based workbenches ( Cfd https://github.com/qingfengxia/Cfd and CfdOF https://github.com/jaheyns/CfdOF )

Moderator: oliveroxtoby

Post Reply
ElliottDyson
Posts: 1
Joined: Fri Jul 22, 2022 6:58 pm

Meshing with CfdOF

Post by ElliottDyson »

Hi all, brand new to open foam and started with a YouTube tutorial. However, when I generate my mesh I get this error
19:55:26 openfoam: windows support (mingw64) is runtime only
19:55:35 App::DocumentObjectGroupPython: Link(s) to object(s) 'Pad' go out of the allowed scope 'Pad_Mesh'. Instead, the linked object(s) reside within 'Body Body'.

and

22.8: Meshing Exited with error

This was run with cfMesh at a base element size of 5mm. I also tried gmesh to no avail.
I did want to post a screenshot, but it seems this forum does not support that. Hopefully this is something someone will know about and therefore an easy fix.

Many thanks,
Elliott Dyson
User avatar
oliveroxtoby
Posts: 810
Joined: Fri Dec 23, 2016 9:43 am
Location: South Africa

Re: Meshing with CfdOF

Post by oliveroxtoby »

ElliottDyson wrote: Fri Jul 22, 2022 7:02 pm Hi all, brand new to open foam and started with a YouTube tutorial. However, when I generate my mesh I get this error
19:55:26 openfoam: windows support (mingw64) is runtime only
19:55:35 App::DocumentObjectGroupPython: Link(s) to object(s) 'Pad' go out of the allowed scope 'Pad_Mesh'. Instead, the linked object(s) reside within 'Body Body'.
These are warnings that can be disregarded.
22.8: Meshing Exited with error
Please upload your file and see below.
Please provide all the information requested in this post before reporting problems with CfdOF.
Post Reply