I think this is working now.thschrader wrote: ↑Fri Jul 15, 2022 9:35 am Here is an example, rotational mesh at 45 deg.
Meshing works, but sim does not run.
2D meshing
Moderator: oliveroxtoby
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
- oliveroxtoby
- Posts: 837
- Joined: Fri Dec 23, 2016 9:43 am
- Location: South Africa
Re: 2D meshing
-
- Veteran
- Posts: 3157
- Joined: Sat May 20, 2017 12:06 pm
- Location: Germany
Re: 2D meshing
Works. In single cpu-mode. When using parallel option,
decomposepar.exe stops with error:
With 2D-planar mesh, multi cpu works:
decomposepar.exe stops with error:
Code: Select all
09:08:55 Generating stack trace...
09:08:57
Backtrace:
ZN10StackTraceC1Ev [0x626c1855+0x25]
module: C:\PROGRA~1\BLUECF~2\ThirdParty-8\platforms\mingw_w64GccDPInt32\lib\libstack_trace.dll
ZN4Foam5error10printStackERNS_7OstreamE [0x6c30ae5a+0x23a]
module: C:\PROGRA~1\BLUECF~2\OpenFOAM-8\platforms\mingw_w64GccDPInt32Opt\lib\libOpenFOAM.dll
ZN4Foam7sigSegv14sigSegvHandlerEi [0x6c30bb03+0x33]
module: C:\PROGRA~1\BLUECF~2\OpenFOAM-8\platforms\mingw_w64GccDPInt32Opt\lib\libOpenFOAM.dll
(No symbol) [0x41bc22]
module: C:\PROGRA~1\BLUECF~2\OpenFOAM-8\platforms\mingw_w64GccDPInt32Opt\bin\decomposePar.exe
_C_specific_handler [0x7ffe89c27ff8+0x98]
module: C:\WINDOWS\System32\msvcrt.dll
0_chkstk [0x7ffe8a95209f+0x11f]
module: C:\WINDOWS\SYSTEM32\ntdll.dll
RtlRaiseException [0x7ffe8a901454+0x434]
module: C:\WINDOWS\SYSTEM32\ntdll.dll
KiUserExceptionDispatcher [0x7ffe8a950bce+0x2e]
module: C:\WINDOWS\SYSTEM32\ntdll.dll
ZN4Foam11hexRef8DataC1ERKNS_8IOobjectERKS0_RKNS_4ListIiEES9_ [0x63702ec4+0x1c4]
module: C:\PROGRA~1\BLUECF~2\OpenFOAM-8\platforms\mingw_w64GccDPInt32Opt\lib\libdynamicMesh.dll
(No symbol) [0x412257]
module: C:\PROGRA~1\BLUECF~2\OpenFOAM-8\platforms\mingw_w64GccDPInt32Opt\bin\decomposePar.exe
(No symbol) [0x4f2d39]
module: C:\PROGRA~1\BLUECF~2\OpenFOAM-8\platforms\mingw_w64GccDPInt32Opt\bin\decomposePar.exe
(No symbol) [0x4013c1]
module: C:\PROGRA~1\BLUECF~2\OpenFOAM-8\platforms\mingw_w64GccDPInt32Opt\bin\decomposePar.exe
(No symbol) [0x4014f6]
module: C:\PROGRA~1\BLUECF~2\OpenFOAM-8\platforms\mingw_w64GccDPInt32Opt\bin\decomposePar.exe
BaseThreadInitThunk [0x7ffe89eb7034+0x14]
module: C:\WINDOWS\System32\KERNEL32.DLL
RtlUserThreadStart [0x7ffe8a902651+0x21]
module: C:\WINDOWS\SYSTEM32\ntdll.dll
09:08:58
- oliveroxtoby
- Posts: 837
- Joined: Fri Dec 23, 2016 9:43 am
- Location: South Africa
Re: 2D meshing
Thank you for the testing. This should be ok now.thschrader wrote: ↑Sun Jul 17, 2022 7:22 am Works. In single cpu-mode. When using parallel option,
decomposepar.exe stops with error:
-
- Veteran
- Posts: 3157
- Joined: Sat May 20, 2017 12:06 pm
- Location: Germany
Re: 2D meshing
Yes, works, thanks a lot.
Report function is very useful.
45 degree mesh, F-total vector points in 22,5 deg (=pi/8).
This matches with the forces, negative y-vector, + z vector components.
Very nice!
Report function is very useful.
45 degree mesh, F-total vector points in 22,5 deg (=pi/8).
This matches with the forces, negative y-vector, + z vector components.
Very nice!