Collaboration between sketcher, part, draft, curves, partdesign and mesh
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
- JoeKundlak
- Posts: 54
- Joined: Mon Oct 11, 2021 11:35 am
Re: Collaboration between sketcher/part and draft. sketcher for tangents, draft for array and 3d bspline. 3d wireframe d
It's not necessarily ťhe speed, it's a combination of the german interface and advanced techniques (ie. not known to me yet). Give me a year
Joe
---------------------------------------------------
translating into SK: https://wiki.freecadweb.org
---------------------------------------------------
translating into SK: https://wiki.freecadweb.org
- thomas-neemann
- Veteran
- Posts: 11958
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Collaboration between sketcher/part and draft. sketcher for tangents, draft for array and 3d bspline. 3d wireframe d
I also needed 1 year.JoeKundlak wrote: ↑Fri Nov 19, 2021 4:45 pm It's not necessarily ťhe speed, it's a combination of the german interface and advanced techniques (ie. not known to me yet). Give me a year
- thomas-neemann
- Veteran
- Posts: 11958
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Collaboration between sketcher/part and draft. sketcher for tangents, draft for array and 3d bspline. 3d wireframe d
cooperation part draft
https://www.youtube.com/watch?v=1Mn-fmeIV9E
edit
here extrusion is better than loft
https://forum.freecadweb.org/viewtopic. ... 99#p549945
https://www.youtube.com/watch?v=1Mn-fmeIV9E
edit
here extrusion is better than loft
https://forum.freecadweb.org/viewtopic. ... 99#p549945
Last edited by thomas-neemann on Sat Nov 27, 2021 7:45 am, edited 2 times in total.
Re: Collaboration between sketcher/part and draft. sketcher for tangents, draft for array and 3d bspline. 3d wireframe d
It is recommended to use the simplest tool possible. So you should rather use a pocket instead of the loft. It may work here, but in other cases things may fail, e.g. because loft can create plain B-spline faces instead of real planes.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- thomas-neemann
- Veteran
- Posts: 11958
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Collaboration between sketcher/part and draft. sketcher for tangents, draft for array and 3d bspline. 3d wireframe d
I find that very interesting. is there an example file for such a case?
Re: Collaboration between sketcher/part and draft. sketcher for tangents, draft for array and 3d bspline. 3d wireframe d
There are lots of these in the forum, but I have none at hand currently.thomas-neemann wrote: ↑Sat Nov 27, 2021 6:32 am I find that very interesting. is there an example file for such a case?
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- thomas-neemann
- Veteran
- Posts: 11958
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Collaboration between sketcher/part and draft. sketcher for tangents, draft for array and 3d bspline. 3d wireframe d
ok, i will look for something like that, if anyone else has a file, please upload it
- thomas-neemann
- Veteran
- Posts: 11958
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Collaboration between sketcher/part and draft. sketcher for tangents, draft for array and 3d bspline. 3d wireframe d
according to my understanding, extrude should also avoid the problem
Re: Collaboration between sketcher/part and draft. sketcher for tangents, draft for array and 3d bspline. 3d wireframe d
Extrude is most probably what is used internally if you create a pocket. The quality of the result will thus be as good as with the PartDesign feature, only the way requires more steps.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- thomas-neemann
- Veteran
- Posts: 11958
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Collaboration between sketcher/part and draft. sketcher for tangents, draft for array and 3d bspline. 3d wireframe d
cooperation sketcher part
https://www.youtube.com/watch?v=rCfmtdCaUzI
OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 0.20.26479 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 00e0fc7)
Hash: 00e0fc73d950a26d9cc41bbc861a53bda7754d58
Python version: 3.9.7
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.3
Locale: German/Germany (de_DE)
https://www.youtube.com/watch?v=rCfmtdCaUzI
OS: Ubuntu 20.04.1 LTS (XFCE/xubuntu)
Word size of FreeCAD: 64-bit
Version: 0.20.26479 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 00e0fc7)
Hash: 00e0fc73d950a26d9cc41bbc861a53bda7754d58
Python version: 3.9.7
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.5.3
Locale: German/Germany (de_DE)