Short FreeCAD Tutorials - SUBTITLED (EN+NL)

A place to share learning material: written tutorials, videos, etc.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
AllVisuals4U
Posts: 13
Joined: Sat Jul 22, 2017 2:18 pm
Contact:

Short FreeCAD Tutorials - SUBTITLED (EN+NL)

Post by AllVisuals4U »

Dear FreeCAD community,

I made some FreeCAD tutorials with English and Dutch subtitles!
I hope you find it useful. More tutorials with subtitles will come.

This is my first playlist with subtitled videos:

https://www.youtube.com/playlist?list=P ... a45yZmxOpj

Second playlist:

https://www.youtube.com/playlist?list=P ... IaZAbOwHxd

Third playlist:

https://www.youtube.com/playlist?list=P ... IymA51ppVZ
Last edited by AllVisuals4U on Sun Oct 22, 2017 4:29 pm, edited 3 times in total.
AllVisuals4U
Learn To Design | 3D Printing, Design & Lifehacks
YouTube https://youtube.com/AllVisuals4U
LBRY https://lbry.tv/@AllVisuals4U:7
BitTube https://bittube.tv/profile/AllVisuals4U
chrisb
Veteran
Posts: 53930
Joined: Tue Mar 17, 2015 9:14 am

Re: Short FreeCAD Tutorials - SUBTITLED (EN+NL)

Post by chrisb »

You found a good speed for your videos, they are not too fast. I can read the subtitles and still follow the video without stopping it.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
AllVisuals4U
Posts: 13
Joined: Sat Jul 22, 2017 2:18 pm
Contact:

Re: Short FreeCAD Tutorials - SUBTITLED (EN+NL)

Post by AllVisuals4U »

Thanks for saying that! When i understand something, i can go way too fast for someone else. So it's great to hear that the speed is alright.
AllVisuals4U
Learn To Design | 3D Printing, Design & Lifehacks
YouTube https://youtube.com/AllVisuals4U
LBRY https://lbry.tv/@AllVisuals4U:7
BitTube https://bittube.tv/profile/AllVisuals4U
MaffysDad
Posts: 1
Joined: Mon Nov 13, 2017 8:47 pm

Re: Short FreeCAD Tutorials - SUBTITLED (EN+NL)

Post by MaffysDad »

Have to say a thank you to AllVisuals4U, the videos are basic, and when you start using a program that is quite frankly potentially complex, and where in your head you can see what you want but getting a computer to understand that is the biggest problem, I have to say, basic is good!, I really do need as much help as I can get to make the learning curve as easy and as understandable as it can possibly be.

I am designing a trailer for three motorbikes, I've already designed it on paper, and transferred that to a program 'paid-for' program called TotalCAD2D/3D, which I could only do in 2D, to translate that into 3D I found frankly, well, seriously impossible, and there is no help out there for it!

Initially I watched the introduction videos from Bram de Vries but found they were a little 'next step', I needed something a bit more novice, however, I would strongly recommend watching them as they are very informative and a good aid for when watching these Short FreeCAD Tutorials from AllVisuals4U, and after watching them I decided to take the plunge and see if I could do my project in 3D, and so far I've got the basic two channels for the wheels and rear support bar in 3D, in their correct location!

I'm sure I'm going about my project the hard way, and I do have questions, but in a couple of evenings I've managed to do more with FreeCAD than I could with the 'paid-for' program and the help out there is amazing! Needless to say, I'm delighted!
Post Reply