missing file on Tolerancing wiki page

Discussions about the development of the TechDraw workbench
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
david69
Veteran
Posts: 1773
Joined: Wed Jan 01, 2014 7:48 pm

missing file on Tolerancing wiki page

Post by david69 »

on Tolerancing, we read:
  • ISO 1101 / ASME Y14.5 Stating and interpreting Geometric Dimensions and Tolerances (Definitions and symbols) 1
  • ISO 16792 / ASME Y14.41 Model-based definitions (CAD data) 3D model presentation and geometric dimensioning and tolerancing 2
at the very end of each line, we are supposed to find files.
the first address is http://www.sharifcadcam.ir/uploaded/2e2 ... 686c4f.pdf, but error 404.
the second one is refered to a file without extension.

can we have the right ones or simply we remove these links.
User avatar
Roy_043
Veteran
Posts: 8450
Joined: Thu Dec 27, 2018 12:28 pm

Re: missing file on Tolerancing wiki page

Post by Roy_043 »

We should definitely remove the 2nd link: It is a licensed PDF file.
User avatar
Roy_043
Veteran
Posts: 8450
Joined: Thu Dec 27, 2018 12:28 pm

Re: missing file on Tolerancing wiki page

Post by Roy_043 »

BTW it seems we are at cross purposes here. I have deliberately removed this page from translation, it is a roadmap after all, not intended for the average user. And I now see that you have reintroduced translation tags.
david69
Veteran
Posts: 1773
Joined: Wed Jan 01, 2014 7:48 pm

Re: missing file on Tolerancing wiki page

Post by david69 »

if I put it for translation, it's because there is a reference at the bottom of this table https://wiki.freecadweb.org/Workarounds ... orkarounds, line 16 with GD&T.
I didn't know you put it back for non translation (well I never checked that up to now). I've found that page with the translation of the above page.

I would not called it roadmap, IMO there are information.
TechDraw_Geometric_dimensioning_and_tolerancing talks about Tolerancing, may be the two can be merged.
User avatar
Roy_043
Veteran
Posts: 8450
Joined: Thu Dec 27, 2018 12:28 pm

Re: missing file on Tolerancing wiki page

Post by Roy_043 »

david69 wrote: Wed Aug 03, 2022 8:15 pm may be the two can be merged
They are about two different concepts.
david69
Veteran
Posts: 1773
Joined: Wed Jan 01, 2014 7:48 pm

Re: missing file on Tolerancing wiki page

Post by david69 »

all right. we remove the two links?
I see that you have modified the reference link in https://wiki.freecadweb.org/Workarounds ... orkarounds
User avatar
Roy_043
Veteran
Posts: 8450
Joined: Thu Dec 27, 2018 12:28 pm

Re: missing file on Tolerancing wiki page

Post by Roy_043 »

These two links (and the translation tags) have been removed.
Post Reply