[Paid] FreeCAD scripting expert for Antenna project

Post here if you have a FreeCAD-related job to offer to the FreeCAD community. This can include programming or modeling.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
openBrain
Veteran
Posts: 9034
Joined: Fri Nov 09, 2018 5:38 pm
Contact:

Re: [Paid] FreeCAD scripting expert for Antenna project

Post by openBrain »

Zolko wrote: Mon Apr 25, 2022 1:57 pm What exactly is the "FreeCAD project " ?
You know.
Where, concretely, would the money go ?
There : https://salt.bountysource.com/teams/freecad
You seem to be proposing that someone does the job and someone-else gets the money ... doesn't sound like a very promising business model.
Rather than doing the job, getting money, then donating to FC, I propose that requester directly donates. This is called efficiency. Nothing to do with business model. ;)
User avatar
adrianinsaval
Veteran
Posts: 5541
Joined: Thu Apr 05, 2018 5:15 pm

Re: [Paid] FreeCAD scripting expert for Antenna project

Post by adrianinsaval »

Zolko wrote: Mon Apr 25, 2022 1:57 pm You seem to be proposing that someone does the job and someone-else gets the money...
It has happened before in this very forum, it's obviously voluntary, I've done it myself too. Nothing is stopping individuals who would like to get payed from offering their services, this subforum is for that.
User avatar
johnwang
Veteran
Posts: 1345
Joined: Sun Jan 27, 2019 12:41 am

Re: [Paid] FreeCAD scripting expert for Antenna project

Post by johnwang »

Zolko wrote: Mon Apr 25, 2022 2:00 pm Is the offer still available ?
A few weeks have past. Probably finished.
hfc series CAE workbenches for FreeCAD (hfcNastran95, hfcMystran, hfcFrame3DD, hfcSU2 and more)
User avatar
johnwang
Veteran
Posts: 1345
Joined: Sun Jan 27, 2019 12:41 am

Re: [Paid] FreeCAD scripting expert for Antenna project

Post by johnwang »

adrianinsaval wrote: Mon Apr 25, 2022 2:14 pm It has happened before in this very forum, it's obviously voluntary, I've done it myself too. Nothing is stopping individuals who would like to get payed from offering their services, this subforum is for that.
I have seen a few offers ended successfully in donation, but haven't seen one normally paid in the last one or two year here. I have no problem for both, but would like to hear more successful story that people get paid by using freecad.
hfc series CAE workbenches for FreeCAD (hfcNastran95, hfcMystran, hfcFrame3DD, hfcSU2 and more)
User avatar
johnwang
Veteran
Posts: 1345
Joined: Sun Jan 27, 2019 12:41 am

Re: [Paid] FreeCAD scripting expert for Antenna project

Post by johnwang »

openBrain wrote: Mon Apr 25, 2022 2:08 pm
Have you got this job?
hfc series CAE workbenches for FreeCAD (hfcNastran95, hfcMystran, hfcFrame3DD, hfcSU2 and more)
openBrain
Veteran
Posts: 9034
Joined: Fri Nov 09, 2018 5:38 pm
Contact:

Re: [Paid] FreeCAD scripting expert for Antenna project

Post by openBrain »

johnwang wrote: Fri Apr 29, 2022 9:38 pm
openBrain wrote: Mon Apr 25, 2022 2:08 pm
Have you got this job?
Nope. ;)
User avatar
adrianinsaval
Veteran
Posts: 5541
Joined: Thu Apr 05, 2018 5:15 pm

Re: [Paid] FreeCAD scripting expert for Antenna project

Post by adrianinsaval »

johnwang wrote: Fri Apr 29, 2022 9:34 pm
Usually individual deals end up being discussed over PMs not on the forum
User avatar
onekk
Veteran
Posts: 6144
Joined: Sat Jan 17, 2015 7:48 am
Contact:

Re: [Paid] FreeCAD scripting expert for Antenna project

Post by onekk »

It will be not a bad idea that the OP will let us know if the job is assigned to someone.

Probably some "engage rules" have to be stated.

How about a "banner" at top of this Forum section with some rules?

Maybe stating some decorators like [Paid], or [OpenSource], [Collaboration Wanted], [Closed], [Assigned] or similar could be helpful, but I don't know who his "in charge" for this sort of things.


NOTE: Job is already assigned, I know because I have contacted by PM the guy that made the offer.

Regards

Carlo D.
GitHub page: https://github.com/onekk/freecad-doc.
- In deep articles on FreeCAD.
- Learning how to model with scripting.
- Various other stuffs.

Blog: https://okkmkblog.wordpress.com/
User avatar
adrianinsaval
Veteran
Posts: 5541
Joined: Thu Apr 05, 2018 5:15 pm

Re: [Paid] FreeCAD scripting expert for Antenna project

Post by adrianinsaval »

very hard to enforce that kind of requirement so IMO things are fine as is, it's natural to assume that old post have been fulfilled or the OP has moved on.
User avatar
onekk
Veteran
Posts: 6144
Joined: Sat Jan 17, 2015 7:48 am
Contact:

Re: [Paid] FreeCAD scripting expert for Antenna project

Post by onekk »

adrianinsaval wrote: Sat Jun 04, 2022 2:28 pm very hard to enforce that kind of requirement so IMO things are fine as is, it's natural to assume that old post have been fulfilled or the OP has moved on.
I agree that is difficult.

Possible approach could be:

- "poking the OP", maybe a moderator could preiodically send a PM to remeber to "close the thread".
- an "automatic way" after some time a moderator could add some "tags" like [Close], if the OP will maitain it open he knows if he read the Rules that after say 3 months the post will be marked as [Closed] it has to take some actions like making a post that confirm the availability of the job, or other actions.


As usual is only a suggestion, and probably asking someone make a job is not very fair. :-D

Only to improve this part of the forum, for people that maybe will want to make a job with FC. (That will surely improve FC spreading).

But these are only my two cents.

Regards

Carlo D.
GitHub page: https://github.com/onekk/freecad-doc.
- In deep articles on FreeCAD.
- Learning how to model with scripting.
- Various other stuffs.

Blog: https://okkmkblog.wordpress.com/
Post Reply