FreeCAD Parts Design and Assemblies Tutor $40/hr (negotiable)
Posted: Mon Mar 15, 2021 3:03 am
I'm trying to model a cargo van with camper conversion modifications, but I'm so new to FreeCAD, that it's very hard. I'm looking for someone who's going to be able to call me, and I can share my screen.
Near term:
Learn assembly level constraints (I'm guessing this is workbench: A2Plus, Assembly 3, or Assembly 4?), mating, positioning, and etc. I have an imported step file that needs to be properly constrained in place. I want to constrain the fan (step file) shown by the driver's rear wheel to the top middle of the roof and specify how many inches it should be from the back of the van.
Fix the van floor thickness and wheel wells. Talk about order of operations for "sculpting" to make the chassis look more like a real Ford Transit.
Chamfer the vehicle's boxy edges
Long term:
Potential for more work. Help with issues that come up, questions, and potentially walking through new concepts and teachings.
Pay:
Negotiable, depending on experience. Starts at $40 per hour for minimum experience.
Hours:
Evenings (MST, timezone) and weekends as needed, flexible
Experience:
Minimum of 1000 hours on FreeCAD
Knowledgeable about part creation, parts design workbench, assemblies, and assembly constraints.
A2PLUS, Assembly 3, or Assembly 4 workbench (if needed for my task)
Linux is an added plus
Reply back to this message with your:
Estimated number of hours designing on FreeCAD
Experience related to what I'm wanting to learn
Why you think you'd be a good fit
Current model:
Idea of what the project will look like:
Near term:
Learn assembly level constraints (I'm guessing this is workbench: A2Plus, Assembly 3, or Assembly 4?), mating, positioning, and etc. I have an imported step file that needs to be properly constrained in place. I want to constrain the fan (step file) shown by the driver's rear wheel to the top middle of the roof and specify how many inches it should be from the back of the van.
Fix the van floor thickness and wheel wells. Talk about order of operations for "sculpting" to make the chassis look more like a real Ford Transit.
Chamfer the vehicle's boxy edges
Long term:
Potential for more work. Help with issues that come up, questions, and potentially walking through new concepts and teachings.
Pay:
Negotiable, depending on experience. Starts at $40 per hour for minimum experience.
Hours:
Evenings (MST, timezone) and weekends as needed, flexible
Experience:
Minimum of 1000 hours on FreeCAD
Knowledgeable about part creation, parts design workbench, assemblies, and assembly constraints.
A2PLUS, Assembly 3, or Assembly 4 workbench (if needed for my task)
Linux is an added plus
Reply back to this message with your:
Estimated number of hours designing on FreeCAD
Experience related to what I'm wanting to learn
Why you think you'd be a good fit
Current model:
Idea of what the project will look like: