Hello everybody,
I'm newby to use this software (now 0.20.1).
A simple question for many of us:
Imagine I have to make a simple box, I give the sheet (in pdf format) in the hand's man who must
do the job with the flat plat of the box. How can I indicate to him in
the drawing for example 45° degrees upward the first bend, then the second one
90° downward..and so on..
Can someone help me in order to indicate me a good tutorial for this problem?
FLAT PATTERN SHEET METAL : DIRECTION OF THE ANGLE IN TECHDRAW
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
- papyblaise
- Veteran
- Posts: 7877
- Joined: Thu Jun 13, 2019 4:28 pm
- Location: France
Re: FLAT PATTERN SHEET METAL : DIRECTION OF THE ANGLE IN TECHDRAW
Thereby
we do not specify the 90° bends nor the internal radii which are by default equal to the thickness (well, that's how I was taught and practiced for 50 years in my country )
we do not specify the 90° bends nor the internal radii which are by default equal to the thickness (well, that's how I was taught and practiced for 50 years in my country )
- Attachments
-
- Z.FCStd
- (24.3 KiB) Downloaded 6 times
-
- Z.JPG (39.18 KiB) Viewed 244 times
- Shalmeneser
- Veteran
- Posts: 9475
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: FLAT PATTERN SHEET METAL : DIRECTION OF THE ANGLE IN TECHDRAW
Je dirais même plus.
With Create3DDimension031.FCMacro, it's easy to create axonometric view : https://forum.freecadweb.org/viewtopic. ... 14#p639862
With Create3DDimension031.FCMacro, it's easy to create axonometric view : https://forum.freecadweb.org/viewtopic. ... 14#p639862
- Attachments
-
- Annotation 2022-11-28 115658.jpg (27.55 KiB) Viewed 221 times