Hello!
I am having difficulty trying to sweep a profile along a circular path. I keep getting the error message "Path must not be a null shape".
The shape is round and I have added a circle with the part bench as a path, just slightly smaller than the diameter of the body, however,
the profile just does not want to sweep in a circular fashion around the permiter.
Must i use another method to create a circular path on the face of the body'?
Your help will be most appreciated.
Help Sweeping a profile along a path
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
- Posts: 1
- Joined: Tue Aug 16, 2022 7:37 pm
Help Sweeping a profile along a path
- Attachments
-
- Base.png (109.09 KiB) Viewed 589 times
Re: Help Sweeping a profile along a path
In PartDesign you usually select the section and invoke the sweep. Then you have to select the Path.
In Part you must not forget to click "Done" before confirming the Sweep dialog.
In Part you must not forget to click "Done" before confirming the Sweep dialog.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- Shalmeneser
- Veteran
- Posts: 9593
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: Help Sweeping a profile along a path
= PartDesign_Grooveto sweep a profile along a circular path
325mm x3 ???
Can you provide your file ?