help of a project

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
pkos7676
Posts: 14
Joined: Sun Dec 05, 2021 9:30 am

help of a project

Post by pkos7676 »

i made this design i want to remove the cylinders but keep the holes in the box anyone can help
Attachments
Screenshot_2022-08-14_15-07-11.png
Screenshot_2022-08-14_15-07-11.png (218.27 KiB) Viewed 549 times
Syres
Veteran
Posts: 2893
Joined: Thu Aug 09, 2018 11:14 am

Re: help of a project

Post by Syres »

That really isn't a very efficient way to model, firstly forget the Part container unless you are doing assemblies, I've been using FreeCAD since 0.16 for real work and never needed them. If you look at the attached file you will see how I would model something along the lines that you want (there's many different routes, many on the forum like the Part Design method).

Code: Select all

OS: Windows 7 Version 6.1 (Build 7601: SP 1)
Word size of FreeCAD: 64-bit
Version: 0.20.1.29410 (Git)
Build type: Release
Branch: releases/FreeCAD-0-20
Hash: f5d13554ecc7a456fb6e970568ae5c74ba727563
Python 3.8.10, Qt 5.15.2, Coin 4.0.1, Vtk 8.2.0, OCC 7.6.3
Locale: English/United Kingdom (en_GB)
Installed mods: 
  * A2plus 0.4.56a
  * Assembly3 0.11.3
  * CfdOF 1.17.7
  * Curves 0.5.4
  * fasteners 0.3.51
  * fcgear 1.0.0
  * freecad.xray 2022.4.17
  * Manipulator 1.4.9
  * Plot 2022.4.17
  * sheetmetal 0.2.56
  * Silk 1.0.0
Attachments
BilletWith2Holes.FCStd
(8.86 KiB) Downloaded 10 times
User avatar
Shalmeneser
Veteran
Posts: 9475
Joined: Wed Dec 23, 2020 12:04 am
Location: Fr

Re: help of a project

Post by Shalmeneser »

:idea:
Attachments
BilletWith2Holes_SHALM.FCStd
(23.32 KiB) Downloaded 5 times
Capture d’écran 2022-08-14 215912.jpg
Capture d’écran 2022-08-14 215912.jpg (35.17 KiB) Viewed 468 times
Last edited by Shalmeneser on Mon Aug 15, 2022 11:24 am, edited 1 time in total.
pkos7676
Posts: 14
Joined: Sun Dec 05, 2021 9:30 am

Re: help of a project

Post by pkos7676 »

thank you very much all
pkos7676
Posts: 14
Joined: Sun Dec 05, 2021 9:30 am

Re: help of a project

Post by pkos7676 »

the second file is not opening
pkos7676
Posts: 14
Joined: Sun Dec 05, 2021 9:30 am

Re: help of a project

Post by pkos7676 »

i want my design to be like the last photi without tbhe cylinder
User avatar
Shalmeneser
Veteran
Posts: 9475
Joined: Wed Dec 23, 2020 12:04 am
Location: Fr

Re: help of a project

Post by Shalmeneser »

pkos7676 wrote: Mon Aug 15, 2022 11:13 am the second file is not opening
:oops: New file in the precedent post.
pkos7676
Posts: 14
Joined: Sun Dec 05, 2021 9:30 am

Re: help of a project

Post by pkos7676 »

thank you for the help
Post Reply