Scaled Draft Clone fails Part Check Geometry.

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
edwilliams16
Veteran
Posts: 3106
Joined: Thu Sep 24, 2020 10:31 pm
Location: Hawaii
Contact:

Scaled Draft Clone fails Part Check Geometry.

Post by edwilliams16 »

checkGeometry.FCStd
(5.62 KiB) Downloaded 9 times
Is this a bug or a false alarm?

EDIT: It even fails for a full sphere.

EDIT2: Part|Create Primitives|Ellipsoid also fails geometry check. https://wiki.freecadweb.org/Part_Ellipsoid
edwilliams16
Veteran
Posts: 3106
Joined: Thu Sep 24, 2020 10:31 pm
Location: Hawaii
Contact:

Re: Scaled Draft Clone fails Part Check Geometry.

Post by edwilliams16 »

It appears this is a long-standing issue. https://forum.freecadweb.org/viewtopic. ... =4&t=12317
TheMarkster
Veteran
Posts: 5505
Joined: Thu Apr 05, 2018 1:53 am

Re: Scaled Draft Clone fails Part Check Geometry.

Post by TheMarkster »

I tried making an isocurve in Curves workbench, but failed.
Snip macro screenshot-ff4b01.png
Snip macro screenshot-ff4b01.png (15.65 KiB) Viewed 293 times
@Chris_G
User avatar
Chris_G
Veteran
Posts: 2579
Joined: Tue Dec 31, 2013 4:10 pm
Location: France
Contact:

Re: Scaled Draft Clone fails Part Check Geometry.

Post by Chris_G »

TheMarkster wrote: Wed Aug 10, 2022 3:44 pm I tried making an isocurve in Curves workbench, but failed.
This should be fixed on a fresh build
Post Reply