line shows on closed sketch and not on opened sketch
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
line shows on closed sketch and not on opened sketch
I have a little vertical line showing up when the sketch is closed but when I open it it dissapears.
when sketch is closed:
when sketch is opened:
When I opened sketch I clicked on every element in the list and that line is not there but when I close the sketch it shows up.
I have one more example on the same sketch.
closed sketch:
when sketch is opened:
when sketch is closed:
when sketch is opened:
When I opened sketch I clicked on every element in the list and that line is not there but when I close the sketch it shows up.
I have one more example on the same sketch.
closed sketch:
when sketch is opened:
Re: line shows on closed sketch and not on opened sketch
Hi and welcome to the forum!
Please upload your file.
Please upload your file.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: line shows on closed sketch and not on opened sketch
Most likely, they are in other sketches, but on different planes.....
Re: line shows on closed sketch and not on opened sketch
Here is the file
- Attachments
-
- al-profile.FCStd
- (11.33 KiB) Downloaded 15 times
- thomas-neemann
- Veteran
- Posts: 11958
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: line shows on closed sketch and not on opened sketch
it seems to have to do with the contrains. if you delete it, the line disappears
- papyblaise
- Veteran
- Posts: 8024
- Joined: Thu Jun 13, 2019 4:28 pm
- Location: France
Re: line shows on closed sketch and not on opened sketch
clear all constraints and half of the profile
reconstruct the geometric constraints, a Pad and a symmetry
reconstruct the geometric constraints, a Pad and a symmetry
- Attachments
-
- profil.FCStd
- (29.31 KiB) Downloaded 7 times
-
- profil.JPG (27.07 KiB) Viewed 401 times
Re: line shows on closed sketch and not on opened sketch
Found it!!
Constraint79 is a horizontal constraint between the left lower circle and the line on the X-axis. Delete this and the error is gone.
Constraint79 is a horizontal constraint between the left lower circle and the line on the X-axis. Delete this and the error is gone.
Re: line shows on closed sketch and not on opened sketch
Thank you! It is a good solution although Willems is more specific.papyblaise wrote: ↑Mon Jul 04, 2022 7:23 am clear all constraints and half of the profile
reconstruct the geometric constraints, a Pad and a symmetry