Page 1 of 2
line shows on closed sketch and not on opened sketch
Posted: Fri Jul 01, 2022 8:38 am
by kresop
I have a little vertical line showing up when the sketch is closed but when I open it it dissapears.
when sketch is closed:
- closed_sketch.png (6.26 KiB) Viewed 553 times
when sketch is opened:
- opened_sketch.png (17.84 KiB) Viewed 553 times
When I opened sketch I clicked on every element in the list and that line is not there but when I close the sketch it shows up.
I have one more example on the same sketch.
closed sketch:
- closed_sketch_2.png (6.38 KiB) Viewed 551 times
when sketch is opened:
- closed_sketch_2.png (7.86 KiB) Viewed 551 times
Re: line shows on closed sketch and not on opened sketch
Posted: Fri Jul 01, 2022 9:15 am
by chrisb
Hi and welcome to the forum!
Please upload your file.
Re: line shows on closed sketch and not on opened sketch
Posted: Fri Jul 01, 2022 10:19 am
by Bance
Most likely, they are in other sketches, but on different planes.....
Re: line shows on closed sketch and not on opened sketch
Posted: Mon Jul 04, 2022 6:41 am
by kresop
Here is the file
Re: line shows on closed sketch and not on opened sketch
Posted: Mon Jul 04, 2022 7:23 am
by thomas-neemann
kresop wrote: ↑Mon Jul 04, 2022 6:41 am
it seems to have to do with the contrains. if you delete it, the line disappears
Re: line shows on closed sketch and not on opened sketch
Posted: Mon Jul 04, 2022 7:23 am
by papyblaise
clear all constraints and half of the profile
reconstruct the geometric constraints, a Pad and a symmetry
Re: line shows on closed sketch and not on opened sketch
Posted: Mon Jul 04, 2022 7:24 am
by openBrain
kresop wrote: ↑Mon Jul 04, 2022 6:41 am
Here is the file
The sketch is broken. Solver can't solve it. You should solve this issue first as errors in sketches (in features in general) stops display updating.
Re: line shows on closed sketch and not on opened sketch
Posted: Mon Jul 04, 2022 7:38 am
by Willem
Found it!!
Constraint79 is a horizontal constraint between the left lower circle and the line on the X-axis. Delete this and the error is gone.
Re: line shows on closed sketch and not on opened sketch
Posted: Mon Jul 04, 2022 7:47 am
by kresop
Willem wrote: ↑Mon Jul 04, 2022 7:38 am
Found it!!
Constraint79 is a horizontal constraint between the left lower circle and the line on the X-axis. Delete this and the error is gone.
AMAZING !!!
Thank you!
Re: line shows on closed sketch and not on opened sketch
Posted: Mon Jul 04, 2022 8:34 am
by kresop
papyblaise wrote: ↑Mon Jul 04, 2022 7:23 am
clear all constraints and half of the profile
reconstruct the geometric constraints, a Pad and a symmetry
Thank you! It is a good solution although Willems is more specific.