Face is missing when exporting to stl

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
LomBrox
Posts: 1
Joined: Thu Jun 30, 2022 2:37 am

Face is missing when exporting to stl

Post by LomBrox »

Hello!

I want to export a body to stl format. However, when I export it, a face is missing (Pictur stl).
The face exists (Picture FreeCAD) and is about 1mm thick, apart from the area marked in red (Picture FreeCAD_1) , which is about 0.1mm thick.
What could be the problem?
Attachments
stl.PNG
stl.PNG (47.75 KiB) Viewed 191 times
FreeCAD_1.PNG
FreeCAD_1.PNG (62.82 KiB) Viewed 191 times
FreeCAD.PNG
FreeCAD.PNG (37.23 KiB) Viewed 191 times
chrisb
Veteran
Posts: 43406
Joined: Tue Mar 17, 2015 9:14 am

Re: Face is missing when exporting to stl

Post by chrisb »

Hi and welcome to the forum!

Please attach the file, and describe in detail how you exported. What did you select? A body? A feature?
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
User avatar
Kunda1
Veteran
Posts: 12691
Joined: Thu Jan 05, 2017 9:03 pm

Re: Face is missing when exporting to stl

Post by Kunda1 »

@LomBrox ping
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
#lowhangingfruit | Use the Source, Luke. | How to Help FreeCAD | How to report FC bugs and features
Post Reply