use of mixed curves

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
berunous
Posts: 13
Joined: Sat Jun 11, 2022 4:00 pm

use of mixed curves

Post by berunous »

I drew two Bsplines after having selected them I click on mixed curves. I get the following error message
"18:06:10 Traceback (most recent call last):
File "C:\Users\Acer\AppData\Roaming\FreeCAD\Mod\Curves\.\freecad\Curves\mixed_curve.py", line 86, in execute
mixed = obj.ExtensionProxy.approximate(obj, cc.shape())
File "C:\Users\Acer\AppData\Roaming\FreeCAD\Mod\Curves\.\freecad\Curves\mixed_curve.py", line 44, in shape
curves += f1.Surface.intersectSS(f2.Surface)
<class 'RuntimeError'>: Intersection of surfaces failed
18:06:10 Recompute failed! Please check report view."

have you ever encountered this difficulty? :?:
Attachments
teste mixted-curves.FCStd
(441.79 KiB) Downloaded 8 times
User avatar
thomas-neemann
Veteran
Posts: 6612
Joined: Wed Jan 22, 2020 6:03 pm
Location: Osnabrück DE

Re: use of mixed curves

Post by thomas-neemann »

berunous wrote: Wed Jun 29, 2022 4:14 pm ...
is that helpul?

https://www.youtube.com/watch?v=aVbcNiGIpd8

phpBB [video]
ich biete freecad online-support an, als mini-job
VHS Freecad Webseminare Herbst 2022
https://www.vhs-lingen.de/programm/beru ... 011#inhalt
https://www.vhs-lingen.de/programm/beru ... 012#inhalt
User avatar
Chris_G
Veteran
Posts: 2127
Joined: Tue Dec 31, 2013 4:10 pm
Location: France
Contact:

Re: use of mixed curves

Post by Chris_G »

The two properties Direction1 and Direction2 are set to (0, 0, 0)
They are needed to indicate the extrusion direction of each input curve.
This can be done by setting the desired camera direction when you select the input curves.
With the attach file, this would be :
- set the view to Top View (NumPad 2)
- select the Freehand_BSpline
- set the view to Front View (NumPad 1)
- CTRL + select the Freehand_BSpline001
- click MixedCurve icon.
berunous
Posts: 13
Joined: Sat Jun 11, 2022 4:00 pm

Re: use of mixed curves

Post by berunous »

Ok,is good Christ, but could you explain the sentence below. To allow us to find the different operating modes that must be chosen according to the context of the drawing. example in the tutorial of the previous message it is not the same operating mode.

"Both properties Direction1 and Direction2 are set to (0, 0, 0)
They are needed to indicate the direction of extrusion for each input curve."
Post Reply