My figure disappears when I use another sketch

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
JOSIP
Posts: 2
Joined: Sat Dec 04, 2021 12:23 am

My figure disappears when I use another sketch

Post by JOSIP »

Hello, I am having a problem, I'm trying to make a handsaw, in the first sketch I made the figure and in the second I was trying to make the triangle of the handsaw and the problem was with second sketch, when I try to emptied in sketch my figure disappears with the message "TopoDS::Face", what am I doing wrong :( ?
Attachments
Serrucho.FCStd
(11.46 KiB) Downloaded 18 times
chrisb
Veteran
Posts: 53945
Joined: Tue Mar 17, 2015 9:14 am

Re: My figure disappears when I use another sketch

Post by chrisb »

Hi and welcome to the forum!

The sketch of a pocket must not have T-joints or crossings. Remove the second tooth and use a linear pattern instead.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
JOSIP
Posts: 2
Joined: Sat Dec 04, 2021 12:23 am

Re: My figure disappears when I use another sketch

Post by JOSIP »

chrisb wrote: Sat Dec 04, 2021 2:54 am Hi and welcome to the forum!
The sketch of a pocket must not have T-joints or crossings. Remove the second tooth and use a linear pattern instead.
OMGGGG, yeah that was the problem, thank you so much
Post Reply