[Risolto] Ambiente Sheet Metal - Profili angolari

Forum per le domande e le discussioni in Italiano
Forum rules
regole del forum e le informazioni utili

Importante: PRIMA di chiedere aiuto leggete qui!
Post Reply
dontpanic
Posts: 2
Joined: Mon Jun 13, 2022 11:06 am

[Risolto] Ambiente Sheet Metal - Profili angolari

Post by dontpanic »

Buongiorno,

devo realizzare 16 profili angolari 50x30 da lamiera 30/10 con lunghezza 2500 mm , ho utilizzato l'ambiente Sheet Metal ma i conti non mi tornano.... dai conti fatti a mano dovrei ottenere nr. 16 profili di dimensioni circa 74x2500 che andrei poi a piegare per ottenere l'angolare che mi serve.
Invece unsando sheet metal workbench ottengo lamiere piane da 83,5x2500 mm , probabilmente sto sbagliando qualcosa.
Qualcuno può aiutarmi a capire?

OS: Windows 10 Version 2009
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24267 +148 (Git)
Build type: Release
Branch: Branch_0.19.4
Hash: 476ecf091941bead59b14e44afa6064d5a66afa3
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.3
Locale: Italian/Italy (it_IT)

Grazie
Attachments
Profili Angolari.FCStd
(33.65 KiB) Downloaded 73 times
Last edited by dontpanic on Thu Jun 16, 2022 11:10 am, edited 1 time in total.
User avatar
-alex-
Veteran
Posts: 1856
Joined: Wed Feb 13, 2019 9:42 pm
Location: France

Re: Ambiente Sheet Metal -

Post by -alex- »

dontpanic wrote: Mon Jun 13, 2022 11:15 am Qualcuno può aiutarmi a capire?
Sorry for writing in english:

For 3mm aluminium material: min inner bend radius >=2mm to avoid shearing and cracks
K factor = 0.5 should be quite good (Ri>=2). To be defined though.
You have to check that external dimensions are 50x30. Your model is 53.5x33,5.
You should better extrude a L sketch with sheetmetal SheetMetal_AddBase, it's easier to get the right outer dimensions in your case.

Edit: file added
L-square_SMWB.png
L-square_SMWB.png (25.77 KiB) Viewed 1206 times
L-square.FCStd
(15.37 KiB) Downloaded 63 times
Last edited by -alex- on Mon Jun 13, 2022 6:23 pm, edited 1 time in total.
User avatar
onekk
Veteran
Posts: 6146
Joined: Sat Jan 17, 2015 7:48 am
Contact:

Re: Ambiente Sheet Metal -

Post by onekk »

dontpanic wrote: Mon Jun 13, 2022 11:15 am ...
devo realizzare 16 profili angolari 50x30 da lamiera 30/10 con lunghezza 2500 mm , ho utilizzato l'ambiente Sheet Metal ma i conti non mi tornano.... dai conti fatti a mano dovrei ottenere nr. 16 profili di dimensioni circa 74x2500 che andrei poi a piegare per ottenere l'angolare che mi serve.
Invece unsando sheet metal workbench ottengo lamiere piane da 83,5x2500 mm , probabilmente sto sbagliando qualcosa.
Qualcuno può aiutarmi a capire?
...
Benvenuto nel forum.

Complimenti per il post correttamente impostato, ultimamente non capita spesso.

Hai problemi con la risposta in inglese che ti è stata data?

Se necessario potrei tentare di tradurla. (Ma tieni conto che ero appena sufficiente in Inglese e che anche ora qualche volta commetto errori e non mi faccio capire, però usandolo tutti i giorni, qualcosina ho imparato) :D

Saluti

Carlo D.
GitHub page: https://github.com/onekk/freecad-doc.
- In deep articles on FreeCAD.
- Learning how to model with scripting.
- Various other stuffs.

Blog: https://okkmkblog.wordpress.com/
dontpanic
Posts: 2
Joined: Mon Jun 13, 2022 11:06 am

Re: Ambiente Sheet Metal -

Post by dontpanic »

Vi ringrazio ho risolto ! siete stati gentilissimi!
User avatar
onekk
Veteran
Posts: 6146
Joined: Sat Jan 17, 2015 7:48 am
Contact:

Re: Ambiente Sheet Metal -

Post by onekk »

dontpanic wrote: Thu Jun 16, 2022 11:09 am
Nessun problema, saluti.

Carlo D.
GitHub page: https://github.com/onekk/freecad-doc.
- In deep articles on FreeCAD.
- Learning how to model with scripting.
- Various other stuffs.

Blog: https://okkmkblog.wordpress.com/
Post Reply