FreeCAD Forum

Description: Plunger, Mario's comrade
Usage: Granting freedom to many things

OS: Microsoft Windows 10
FreeCAD version: 0.19.4



How I done it:

This one is on part workbench, all unit in metres unless mentioned (Sorry USA, Burma, Liberia), purely CSG

Cup

1. Create a sphere with
   • Radius of 0.075
   • U parameter of π rad or 180 deg
   • V parameter of -½π rad or -90 deg and ½π rad or 90 deg
2. Create another sphere with
   • Radius of 0.07
   • U parameter of π rad or 180 deg
   • V parameter of -½π rad or -90 deg and ½π rad or 90 deg
3. Make a cut by selecting the larger half sphere (Sphere) first then the other sphere (Sphere001)
4. Create a tube with
   • Outer radius of 0.015
   • Inner radius of 0.01
   • Height of 0.045
   • Z at 0.07
5. Make a union with the above cut and the tube
6. Fillet the selected edge with the edge between the tube and the cut (Edge5) with
   • radius of 0.02

Handle

1. Create a cylinder with
   • Radius of 0.01
   • Height of 0.7
   • Z at 0.07

Finally mark your freedom with your favorrite colour

EDIT: The initial design cup is too way big to be real, I shrunk the cup and shorten the handle

Lol. +1

+1
Fighting the good fight!

Hi

now you have the universal torch of freedom and gratis

for the curve and siphon
and for see the problem
mario