From FreeCAD To The Real World
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
- thomas-neemann
- Veteran
- Posts: 11921
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
- thomas-neemann
- Veteran
- Posts: 11921
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: From FreeCAD To The Real World
Conversion of 6 bar membrane air compressor to hydrogen. suitable for h2 according to the manufacturer
https://www.youtube.com/watch?v=716UVPAFjb8
https://www.youtube.com/watch?v=716UVPAFjb8
Re: From FreeCAD To The Real World
Since our small towable digger only came with a
I therefore designed a digger bucket attachement using FreeCAD. Especially Assembly 4.
The final result after some cutting, turning and welding:
edit: now with animation
I therefore designed a digger bucket attachement using FreeCAD. Especially Assembly 4.
The final result after some cutting, turning and welding:
edit: now with animation
Last edited by Szzer on Mon Mar 14, 2022 6:03 pm, edited 1 time in total.
Re: From FreeCAD To The Real World
what?Since our small towable digger only came with a...
Upload the gifs to dropbox or 3rd party hosting (imgur?)
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Re: From FreeCAD To The Real World
I live in an loft apartment where the stairs are not standard width. I had the need to install a baby gate but none of the solutions on the market suited my needs. Ended up Freecading and 3D printing the mounts for the gate which is meant to be cut into correct width. Printed the mounts out of PETG and for the past 6m they have held up well against the abuse
- Attachments
-
- tree.png (25.05 KiB) Viewed 3656 times
-
- mount.png (65.6 KiB) Viewed 3656 times
-
- mount_col.jpg (539.93 KiB) Viewed 3656 times
-
- Veteran
- Posts: 3157
- Joined: Sat May 20, 2017 12:06 pm
- Location: Germany
Re: From FreeCAD To The Real World
Just finished:
21-m-steel mast on rooftop. Mast is for cellphone communication.
Steel parts designed and calculated with Freecad, static calculation
was done with Smath-Studio (free software). Unfortunatly I still depend on
my commercial statics software to calculate the beam forces.
However, for projects like this FC is industrial ready.
21-m-steel mast on rooftop. Mast is for cellphone communication.
Steel parts designed and calculated with Freecad, static calculation
was done with Smath-Studio (free software). Unfortunatly I still depend on
my commercial statics software to calculate the beam forces.
However, for projects like this FC is industrial ready.
- thomas-neemann
- Veteran
- Posts: 11921
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: From FreeCAD To The Real World
wonderful, freecad will be widely used in companies in the near future
- ragohix769
- Posts: 568
- Joined: Sat Jul 18, 2020 7:04 am
- Location: Rome - Italy
Re: From FreeCAD To The Real World
Simply FANTASTIC!thschrader wrote: ↑Wed Apr 13, 2022 6:49 am Just finished:
21-m-steel mast on rooftop. Mast is for cellphone communication.
Steel parts designed and calculated with Freecad, static calculation
was done with Smath-Studio (free software). Unfortunatly I still depend on
my commercial statics software to calculate the beam forces.
However, for projects like this FC is industrial ready.
mast.JPG
After #ElonMuskBuyTwitter I'm no more on Twitter, that's really enough
=> Now you can find me here on #Mastodon: https://mastodon.uno/@opensoul - I hope more people do the same
=> Now you can find me here on #Mastodon: https://mastodon.uno/@opensoul - I hope more people do the same
- ragohix769
- Posts: 568
- Joined: Sat Jul 18, 2020 7:04 am
- Location: Rome - Italy
Re: From FreeCAD To The Real World
My real world stuff made with our loved FreeCAD:
Iron block system for my darkening shutter (outside the window) is broken. Easy redraw from scratch in Part Design with @FreeCADNews
and then printed. Thanks #FreeCad #opensource #community #foss
Iron block system for my darkening shutter (outside the window) is broken. Easy redraw from scratch in Part Design with @FreeCADNews
and then printed. Thanks #FreeCad #opensource #community #foss
- Attachments
-
- photo_2022-05-04_17-46-29.jpg (107.99 KiB) Viewed 2717 times
-
- wepz.png (686.14 KiB) Viewed 2717 times
Last edited by ragohix769 on Thu May 05, 2022 1:04 am, edited 1 time in total.
After #ElonMuskBuyTwitter I'm no more on Twitter, that's really enough
=> Now you can find me here on #Mastodon: https://mastodon.uno/@opensoul - I hope more people do the same
=> Now you can find me here on #Mastodon: https://mastodon.uno/@opensoul - I hope more people do the same