Thank you for the information, i heave learned a bit more about making PCB's. The screw holes in my PCB's won't be enlarged through holes any more, i can make the outline and mounting holes, even mounting ovals with FreeCAD. This is so much nicer and faster! Further more about the interactiveHTMLBom, i did see a similar tool on a retro channel it was very useful. They were working on a AMIGA PCB populating it. But i am afraid it won't work for my KiCAD 5.1.12 on Win7, tried it out already.
Both Images show the same project.
Image below shows a PCB made with a 3018CNC engraving machine, the process is called isolation milling! The engraving bit is 3mm and the PCB is way to small for hand soldering, the isolation is working tho. A blyatiful failure
!
This Image is a KiCAD export. Notice the gradient, noice isin't it? Mounting holes are in regard to tolerances 3x oval and round now. The square LED's 5x5x7 are 100% FreeCAD made. Also the "JP1" jumper wire, both are a FreeCAD VRML export. Shiny copper jumper wire and the detailed LED's
.