FreeCAD Nodes (renamed from fc_nodes)
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: FreeCAD Nodes (renamed from fc_nodes)
Hi friends,
it took me a while, but the Voronoi on Solid node is now available. It generates a Voronoi diagram not on a mesh but on a real BRep solid and produces either clean solids or shells. It supports the modes solid voronoi cells (0), inverse solid voronoi cells (1), voronoi shells (2) and inverse voronoi shells (3), see figure. Enclosed you will also find a small demo file for an easy entry. Have fun with it!
it took me a while, but the Voronoi on Solid node is now available. It generates a Voronoi diagram not on a mesh but on a real BRep solid and produces either clean solids or shells. It supports the modes solid voronoi cells (0), inverse solid voronoi cells (1), voronoi shells (2) and inverse voronoi shells (3), see figure. Enclosed you will also find a small demo file for an easy entry. Have fun with it!
- Attachments
-
- voronoi_on_sld.7z
- Demo file
- (844 Bytes) Downloaded 82 times
Codelink on GitHub: https://github.com/j8sr0230/codelink
Codelink on PiPy: https://pypi.org/project/codelink/
FreeCAD Nodes Workbench on GitHub: https://github.com/j8sr0230/Nodes
Codelink on PiPy: https://pypi.org/project/codelink/
FreeCAD Nodes Workbench on GitHub: https://github.com/j8sr0230/Nodes
Re: FreeCAD Nodes (renamed from fc_nodes)
Now you have my attention !
I am very interested in creating Voronoï type structures inside solids and was struggling to create a macro for it. I'm sure with that node I will be able to get the results I want much quicker.
Need to find the time to play with it but thank you for your work !
Re: FreeCAD Nodes (renamed from fc_nodes)
Hi friends,
just in time for Black Friday there are lots of new nodes. I have just published the nodes Extrude, Vector Math, Vector Length and Surface Center. Attached is a nice application example where Voronoi cells are extruded in the Z direction depending on their distance from the red marked point. Have fun with it
just in time for Black Friday there are lots of new nodes. I have just published the nodes Extrude, Vector Math, Vector Length and Surface Center. Attached is a nice application example where Voronoi cells are extruded in the Z direction depending on their distance from the red marked point. Have fun with it
Codelink on GitHub: https://github.com/j8sr0230/codelink
Codelink on PiPy: https://pypi.org/project/codelink/
FreeCAD Nodes Workbench on GitHub: https://github.com/j8sr0230/Nodes
Codelink on PiPy: https://pypi.org/project/codelink/
FreeCAD Nodes Workbench on GitHub: https://github.com/j8sr0230/Nodes
Re: FreeCAD Nodes (renamed from fc_nodes)
Models done with this WB are impressive!
As a simple user I hope to be skilled enought someday to use it.
Thanks for your efforts
As a simple user I hope to be skilled enought someday to use it.
Thanks for your efforts
Re: FreeCAD Nodes (renamed from fc_nodes)
After there is a reasonable roundstock of nodes and a stable framework, I will start a Youtube series to promote the Workbench and node-based modeling with FreeCAD. My intention is to pick up all users with small follow along videos. But it will take a bit more time i think
By the way, the node graph I have shown above is complete and does not need any further dependencies. That means, if you wire everything as shown, you will also get the displayed parametric extrusion. Just dare
Codelink on GitHub: https://github.com/j8sr0230/codelink
Codelink on PiPy: https://pypi.org/project/codelink/
FreeCAD Nodes Workbench on GitHub: https://github.com/j8sr0230/Nodes
Codelink on PiPy: https://pypi.org/project/codelink/
FreeCAD Nodes Workbench on GitHub: https://github.com/j8sr0230/Nodes
Re: FreeCAD Nodes (renamed from fc_nodes)
Transform Nodes for FreeCAD Nodes
With the latest update the transform nodes Rotate, Translate and Uniform Scale are now available. All support multi input for all sockets and array broadcasting. Here you can see a simple demo for the Rotate node.
With the latest update the transform nodes Rotate, Translate and Uniform Scale are now available. All support multi input for all sockets and array broadcasting. Here you can see a simple demo for the Rotate node.
Codelink on GitHub: https://github.com/j8sr0230/codelink
Codelink on PiPy: https://pypi.org/project/codelink/
FreeCAD Nodes Workbench on GitHub: https://github.com/j8sr0230/Nodes
Codelink on PiPy: https://pypi.org/project/codelink/
FreeCAD Nodes Workbench on GitHub: https://github.com/j8sr0230/Nodes
Re: FreeCAD Nodes (renamed from fc_nodes)
And the new Evaluate Srf node in action:
Codelink on GitHub: https://github.com/j8sr0230/codelink
Codelink on PiPy: https://pypi.org/project/codelink/
FreeCAD Nodes Workbench on GitHub: https://github.com/j8sr0230/Nodes
Codelink on PiPy: https://pypi.org/project/codelink/
FreeCAD Nodes Workbench on GitHub: https://github.com/j8sr0230/Nodes
Re: FreeCAD Nodes (renamed from fc_nodes)
The new Align node allows you to align shapes to vectors. In the following example, I determine the surface normal of a sphere at selected points and align a prism to it. The duplication of the prism to each point of interest is done automatically by array broadcasting.
Codelink on GitHub: https://github.com/j8sr0230/codelink
Codelink on PiPy: https://pypi.org/project/codelink/
FreeCAD Nodes Workbench on GitHub: https://github.com/j8sr0230/Nodes
Codelink on PiPy: https://pypi.org/project/codelink/
FreeCAD Nodes Workbench on GitHub: https://github.com/j8sr0230/Nodes
Re: FreeCAD Nodes (renamed from fc_nodes)
Unbelievable progress! :mindblown:
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs