Thanks for your response and your new feature built in the new (“ArchWall.py”), I love it, it seems you have read my mind. Now it is so easy to use the ArchSketch
The
following images and attached model are intended to describe the changes to improve/automate creating a wall to the latest method proposed by @paullee
I have save a copy of the original FC file to “ArchWall-Backup.py”. (1- ArchWall.py Replaced.jpg)
I have placed a copy of “ArchWall.py” attached by paullee @ [ArchWall] Auto-creating ArchSketch
Post by paullee » Thu Sep 15, 2022 5:14 am.
I have created a new separate wall (Wall002 - bottom) – Note that it is automatically used the new ArchSketch as the base sketch (Image # 3)
I have connected the top and the middle walls (Wall003 - middle) – Note that it is automatically used the new ArchSketch as the base sketch (Image #3)
By using the new file from @paullee (ArchWall.py) ==> All new walls created after this change are all ArchSketch as base sketch (Image #3)
Important Notice - For Good Result - You Need to Comply Order of Connection - Refer to @paullee post:
paullee wrote: ↑Wed Sep 14, 2022 7:14 pm
[*]When creating Wall and snapped to existing Walls (the last object snapped on) the Base of which is not ArchSketch, the Base object will be changed to an ArchSketch
(if 'Join walls base sketches when possible' is selected in Preference)
[/list]
Top wall is done earlier using the simple sketch as the base
Middle wall is created after the update of ArchWall.py ( new ArchSketch)
connecting top to middle ===>
No good ==> Base object will not be changed to an ArchSketch (top wall - image #4)
connecting middle to top ===>
Good ==> Base object will be changed to an ArchSketch (top wall - image #5)
@paullee I love to test your new feature ==> if possible please keep uploading the ArchWall.py after each major change/update.