FC 0.21 – Rotate – Undo Problem

A forum dedicated to the Draft, Arch and BIM workbenches development.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
User avatar
Palmtree
Posts: 104
Joined: Wed Apr 08, 2020 5:06 am

FC 0.21 – Rotate – Undo Problem

Post by Palmtree »

For simplicity, I prefer to ask one question at a time to the forum.
This is a new question and it is not a repeat of my question at “https://forum.freecadweb.org/viewtopic.php?f=23&t=70448

The attached file is a block of land boundary (4 Points connected by a wire). All contained in the group (Site Boundary).

In BIM WB ==> Highlight the group (Site Boundary - to align site to FC North-refer to Image1) => Modify => Rotate to north (Image1 & Image2) ==> Undo (Ctrl + Z) ==> F5 (Refresh) ==>
Points Undo Ok
Wire Undo Problem (Image3) ? :? :? :? :? :?

Deleting the 2xfiles (system.cfg and user.cfg) does not solve the problem

Am I missing something? :? :? :? :? :? :? Please comment.

**********************************
**********************************

Code: Select all

OS: Windows 10 Version 2009
Word size of FreeCAD: 64-bit
Version: 0.21.29923 (Git)
Build type: Release
Branch: master
Hash: 30cb46cc5f630c97311162413b68edcff95db481
Python 3.10.5, Qt 5.15.4, Coin 4.0.0, Vtk 9.1.0, OCC 7.6.2
Locale: English/Australia (en_AU)
Installed mods: 
  * Behave-Dark-Colors 0.0.1
  * BIM 2021.12.0
  * dodo
  * Help 1.0.3
  * Parts_library
  * PieMenu
  * ProDarkThemePreferencePack 1.0.0
  * SketchArch
**********************************
**********************************
Attachments
Image1.jpg
Image1.jpg (324.75 KiB) Viewed 1234 times
Image2.jpg
Image2.jpg (272.24 KiB) Viewed 1234 times
Image3.jpg
Image3.jpg (233.22 KiB) Viewed 1234 times
Sketch-Site-R2.FCStd
(11.19 KiB) Downloaded 29 times
User avatar
Palmtree
Posts: 104
Joined: Wed Apr 08, 2020 5:06 am

Re: FC 0.21 – Rotate – Undo Problem

Post by Palmtree »

Palmtree wrote: Thu Aug 04, 2022 6:10 am
Points Undo Ok
Wire Undo Problem (Image3) ? :? :? :? :? :?
@acp693 has raised similar issue (refer to attached post)

I have created this thread to link both posts (IMHO it might be a help). :)
******************************************************************

Code: Select all

OS: Windows 10 Version 2009
Word size of FreeCAD: 64-bit
Version: 0.21.31155 (Git)
Build type: Release
Branch: master
Hash: 6f1b29769b33676edca2bd883b80bed25a0758c8
Python 3.10.8, Qt 5.15.4, Coin 4.0.0, Vtk 9.1.0, OCC 7.6.3
Locale: English/Australia (en_AU)
Installed mods: 
  * Behave-Dark-Colors 0.1.1
  * BIM 2021.12.0
  * Dracula 0.0.2
  * ExtremeProDark 2.6.4
  * fasteners 0.4.24
  * ProDarkThemePreferencePack 1.0.0
  * SketchArch
Post Reply