Model view, DraftView, ArchView Difference - Annotation Multiplier & etc

A forum dedicated to the Draft, Arch and BIM workbenches development.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
paullee
Veteran
Posts: 5098
Joined: Wed May 04, 2016 3:58 pm

Model view, DraftView, ArchView Difference - Annotation Multiplier & etc

Post by paullee »

Noted there are a number of difference :)

  1. Dimension Line on the right with an Annotation Style, Scale Multiplier set to say 50, DraftView / Archview seems not honour it
    • Dimension Line on the Right with an Annotation Style : Dot Size = 10, Scale Multiplier 50 - Dot size resulted in model view = 500
    • Dimension Line on the Left with settings Not with Annotation Style : Dot Size just set = 500
  2. Draft Line with Width set to 10, Style set to Dashed : ArchView ignore all settings; DraftView style has scale problem as discussed elsewhere
  3. Sketch with Width set to 10 : ArchView and DraftView ignore this settings
Any idea ?

Test_ Dim-Multiplier_DraftView_ArchView_01.FCStd
(36.91 KiB) Downloaded 18 times
Screenshot from 2022-07-29 15-10-36.png
Screenshot from 2022-07-29 15-10-36.png (216.26 KiB) Viewed 697 times
Screenshot from 2022-07-29 15-10-44.png
Screenshot from 2022-07-29 15-10-44.png (208.82 KiB) Viewed 697 times
Screenshot from 2022-07-29 15-13-36.png
Screenshot from 2022-07-29 15-13-36.png (246.48 KiB) Viewed 697 times
User avatar
Roy_043
Veteran
Posts: 8450
Joined: Thu Dec 27, 2018 12:28 pm

Re: Model view, DraftView, ArchView Difference - Annotation Multiplier & etc

Post by Roy_043 »

Additionally: the text height is hard-coded.

Look at:
Mod/Draft/draftfunctions/svg.py
Mod/Draft/draftfunctions/svgtext.py
paullee
Veteran
Posts: 5098
Joined: Wed May 04, 2016 3:58 pm

Re: Model view, DraftView, ArchView Difference - Annotation Multiplier & etc

Post by paullee »

Text size in DraftView / ArchView does not follow that of the original objects indeed :)
Post Reply