I can not do this simple task any more. The latest FC will add the door ONLY to the corner of the host wall.
BIM => Draft Snap Midpoint ON => Click the wall to select => Click Door ( try to insert at the middle of the wall - Image 1) => Problem? The created door reverts to the start/left corner of the host wall.
Checking the wall sketch => it seems Ok in the intended position (Image3)
I have tried to move the window back to the intended place => Select window => Data-Base- Position => make x =0 y=0 z=0 ===> Problem FC revert to x=-2.500 m y=0.100 m z=0 m (Image3)
Testing on the same computer with FC realthunder (Branch: LinkDaily) ==> All good No problem (Image4)
Is this normal? Any comments please?
******************************************************************************
******************************************************************************
Code: Select all
OS: Windows 10 (10.0)
Word size of FreeCAD: 64-bit
Version: 0.21.29485 (Git)
Build type: Release
Branch: master
Hash: a236ca843fdd6674afb6d7ed1454fbd3b547f5ea
Python 3.8.13, Qt 5.12.9, Coin 4.0.0, Vtk 9.1.0, OCC 7.5.3
Locale: English/Australia (en_AU)
Installed mods:
* Behave-Dark-Colors 0.0.1
* BIM 2021.12.0
* dodo
* Help 1.0.3
* PieMenu
* ProDarkThemePreferencePack 1.0.0
* SketchArch
******************************************************************************
OS: Windows 10 Version 2009
Word size of FreeCAD: 64-bit
Version: 2022.709.26244 +5001 (Git)
Build type: Release
Branch: LinkDaily
Hash: 096210d21183e9dfdc3b25777760bfb6c00a210b
Python version: 3.8.10
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.6.2
Locale: English/Australia (en_AU)