Can "Assembly3" use "XY_Plane, XZ_Plane, YZ_Plane" for "Elements"?

Discussion about the development of the Assembly workbench.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
User avatar
xsuper9988
Posts: 223
Joined: Sat Oct 24, 2020 4:20 am

Can "Assembly3" use "XY_Plane, XZ_Plane, YZ_Plane" for "Elements"?

Post by xsuper9988 »

Can "Assembly3" use "XY_Plane, XZ_Plane, YZ_Plane" for "Elements"?
Top
User avatar
bambuko
Veteran
Posts: 2185
Joined: Thu Oct 24, 2019 12:53 pm
Location: UK, England, North Devon

Re: Can "Assembly3" use "XY_Plane, XZ_Plane, YZ_Plane" for "Elements"?

Post by bambuko »

Yes, you can.
Here an example:

Screenshot from 2022-05-01 16.09.19.png
Screenshot from 2022-05-01 16.09.19.png (352.93 KiB) Viewed 644 times
I am using Link branch and Assembly3
you can also download ... and try it here
excellent Assembly3 tutorials here
Top
User avatar
xsuper9988
Posts: 223
Joined: Sat Oct 24, 2020 4:20 am

Re: Can "Assembly3" use "XY_Plane, XZ_Plane, YZ_Plane" for "Elements"?

Post by xsuper9988 »

bambuko wrote: ↑Sun May 01, 2022 3:10 pm Yes, you can.
Here an example:


Screenshot from 2022-05-01 16.09.19.png
thank you for your reply
I found the problem
I go to create a new topic
Top
Post Reply

Return to “Assembly”