Can't rotate body in Assembly
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: Can't rotate body in Assembly
03 https://1drv.ms/u/s!ArMxdUYEh9fKwCq_BdW ... i?e=2xmaaO
01 https://1drv.ms/u/s!ArMxdUYEh9fKwCstEwm ... u?e=EN8ums
Sorry about all the run-around
01 https://1drv.ms/u/s!ArMxdUYEh9fKwCstEwm ... u?e=EN8ums
Sorry about all the run-around
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
- thomas-neemann
- Veteran
- Posts: 11801
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Can't rotate body in Assembly
now I'm getting one step further, but I get these messages when I refresh
Code: Select all
08:36:39 Line Group File: /tmp/.mount_28751-emNeB3/usr/share/Mod/TechDraw/LineGroup/LineGroup.csv is not readable
08:37:09 Sketcher constraint number 1 is malformed!
08:37:09 Sketcher constraint number 2 is malformed!
08:37:09 Sketch Sketch024 has malformed constraints!
08:37:09 Recompute failed! Please check report view.
Re: Can't rotate body in Assembly
I have an idea of what might have mucked things up. I'll have a good look at it in the morning.
I'll let you know.
Thanks for your patience.
I'll let you know.
Thanks for your patience.
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
Re: Can't rotate body in Assembly
You messed it up. The numbered extensions are backup files created on every saving. So you somehow have deleted your FreeCAD file and now you have reset it to a previously saved state.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Can't rotate body in Assembly
Doesn't appear so at this end
- Attachments
-
- 220426 PR Files.png (124.82 KiB) Viewed 1020 times
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
Re: Can't rotate body in Assembly
What do you mean? *.FCStd1 files are no backup files on your system?
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Can't rotate body in Assembly
No. I meant that I had not deleted my *.FCStd files.
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
Re: Can't rotate body in Assembly
I wish you thread title specified which assembly workbench you are talking about....
Re: Can't rotate body in Assembly
I listed it in the Original Past just after the FC version details.
"It is much harder to simplify than to complicate."
Joseph Kimble
Joseph Kimble
Re: Can't rotate body in Assembly
no, I mean thread title
eg
Assembly 4, Can't rotate body (not Can't rotate body in Assembly)
See how (almost) everybody else is doing it
With this sub-forum serving three different assembly workbenches, it makes it easier to attract right kind of help....