unexpected result with pocket

About the development of the Part Design module/workbench. PLEASE DO NOT POST HELP REQUESTS HERE!
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
User avatar
mwlandolsi
Posts: 135
Joined: Sun Jan 31, 2021 10:49 pm

unexpected result with pocket

Post by mwlandolsi »

I created a part with thickness as shown below:
Screenshot from 2022-05-23 15-36-11.png
Screenshot from 2022-05-23 15-36-11.png (57.51 KiB) Viewed 1467 times
Then I want to cut angles with sketches. I got the following result with Length "through all".
Screenshot from 2022-05-23 15-35-53.png
Screenshot from 2022-05-23 15-35-53.png (69.15 KiB) Viewed 1467 times
Hope that his problem could be taken urgently by the lovely developers.
Greetings.

Code: Select all

OS: Linux Mint 20.1 (X-Cinnamon/cinnamon)
Word size of FreeCAD: 64-bit
Version: 0.20.
Build type: Release
Branch: unknown
Hash: e1f26857346dc85f047cdb073942098e356123ba
Python 3.8.10, Qt 5.12.8, Coin 4.0.0, OCC 7.5.2
Locale: English/United States (en_US) [ OS: English/United States (en_US) ]
Installed mods: 
  * Design456 1560981536.0.0
  * Silk 1560981536.0.0
  * Curves 0.4.2
  * sheetmetal 0.2.49
  * OpticsWorkbench 1.0.8
  * CurvedShapes 1.0.2
User avatar
Shalmeneser
Veteran
Posts: 9443
Joined: Wed Dec 23, 2020 12:04 am
Location: Fr

Re: unexpected result with pocket

Post by Shalmeneser »

No files ? And my crystal balls are broken. URGENT !

(There are no such things as lovely developers here.)
Attachments
Capture d’écran 2022-05-23 165728.jpg
Capture d’écran 2022-05-23 165728.jpg (36.36 KiB) Viewed 1456 times
User avatar
adrianinsaval
Veteran
Posts: 5534
Joined: Thu Apr 05, 2018 5:15 pm

Re: unexpected result with pocket

Post by adrianinsaval »

file please
User avatar
mwlandolsi
Posts: 135
Joined: Sun Jan 31, 2021 10:49 pm

Re: unexpected result with pocket

Post by mwlandolsi »

thanks for the quick answer
here is the file
test thickness pocket.FCStd.zip
(59.48 KiB) Downloaded 40 times
Please note that the initial pad is with taper angle
chrisb
Veteran
Posts: 53785
Joined: Tue Mar 17, 2015 9:14 am

Re: unexpected result with pocket

Post by chrisb »

mwlandolsi wrote: Mon May 23, 2022 4:24 pm here is the filetest thickness pocket.FCStd.zip
Please don't zip FreeCAD files here, they are already zipped. Will have a look at the file.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
chrisb
Veteran
Posts: 53785
Joined: Tue Mar 17, 2015 9:14 am

Re: unexpected result with pocket

Post by chrisb »

The problem is in the Thickness command, which is known to be one of the most problematic commands in FreeCAD. The issue comes directly from the third party geometric kernel and there is nothing the FreeCAD developers can do about it.

Part>CheckGeometry shows the issues.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
User avatar
mwlandolsi
Posts: 135
Joined: Sun Jan 31, 2021 10:49 pm

Re: unexpected result with pocket

Post by mwlandolsi »

Here you mean that when the thickness is suppressed, the problem could be solved ? But I got a result with thickness and a taper angle = 0.
Screenshot from 2022-05-23 23-51-28.png
Screenshot from 2022-05-23 23-51-28.png (51.42 KiB) Viewed 1347 times
test thickness pocket no tapper.FCStd
(112.17 KiB) Downloaded 37 times
chrisb
Veteran
Posts: 53785
Joined: Tue Mar 17, 2015 9:14 am

Re: unexpected result with pocket

Post by chrisb »

mwlandolsi wrote: Mon May 23, 2022 10:49 pmBut I got a result with thickness and a taper angle = 0.
No wonder, with tape angle=0 there are not complicated faces and CheckGeometry shows no errors.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Post Reply