Starting parts
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: Starting parts
Why not make an online library instead of an offline. Peoples could feed it easily by uploading parts. It's should be more alive. If the library was growing, every workbenchs could use it. Thoughts?
- Berserk design
- Posts: 57
- Joined: Fri Jun 15, 2018 6:25 pm
- Contact:
Re: Starting parts
Hello everyone, I have already shared some designs in the User Show case subforum.
I had already seen this thread on the parts library on some occasion, I had not got much interest more than anything else for the organization and especially my little knowledge on GitHub (I move better with google drive: P).
Due to some suggestions from members of this forum I think it is worth learning a little more about this and I have already created a Fork to work from there and upload all (or most) of things I do in FreeCAD
I have made several folder accommodations as there are multiple objects outside of your engineering area or they are repeated. Like the issue of electrical and electronic parts I have separated and moved them, there are still things to put in their place or that I just did not know where to put but in general I think it can work.
I do not know if those who manage the original repository seem excessive or that something may be wrong in the organization that I have done but they can also review it in the link https://github.com/berserkdesign/FreeCAD-library
Sorry if any sentence is not understood but my native language is Spanish and although I read a little English I am very supportive of Google translator.
Viva FreeCAD cab***s
I had already seen this thread on the parts library on some occasion, I had not got much interest more than anything else for the organization and especially my little knowledge on GitHub (I move better with google drive: P).
Due to some suggestions from members of this forum I think it is worth learning a little more about this and I have already created a Fork to work from there and upload all (or most) of things I do in FreeCAD
I have made several folder accommodations as there are multiple objects outside of your engineering area or they are repeated. Like the issue of electrical and electronic parts I have separated and moved them, there are still things to put in their place or that I just did not know where to put but in general I think it can work.
I do not know if those who manage the original repository seem excessive or that something may be wrong in the organization that I have done but they can also review it in the link https://github.com/berserkdesign/FreeCAD-library
Sorry if any sentence is not understood but my native language is Spanish and although I read a little English I am very supportive of Google translator.
Viva FreeCAD cab***s
Observa mi poderosa mano
Re: Starting parts
Thanks for sharing the collection
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- Berserk design
- Posts: 57
- Joined: Fri Jun 15, 2018 6:25 pm
- Contact:
Re: Starting parts
Thanks to all of you too, who have already published quite a few pieces.
_________________________________________________________
I shared some components in the post https://forum.freecadweb.org/viewtopic.php?f=24&t=44856
but I checked this post and its history so I consider it better to keep uploading the screenshots here.
If any moderator can delete the repeated posts in the other post to keep it cleaner I think it would be fine
Already several changes were added to the official repository so several pieces that I uploaded to mine are now available
https://github.com/FreeCAD/FreeCAD-libr ... uss%26Roch
Observa mi poderosa mano
- Berserk design
- Posts: 57
- Joined: Fri Jun 15, 2018 6:25 pm
- Contact:
Re: Starting parts
By the way, I arranged some pieces in folders according to the brand. I want to clarify that I am not trying to advertise anything, they are drawings that I have made for the assemblies of my designs in machinery.
https://github.com/FreeCAD/FreeCAD-libr ... uss%26Roch
https://github.com/FreeCAD/FreeCAD-libr ... uss%26Roch
Observa mi poderosa mano
- Berserk design
- Posts: 57
- Joined: Fri Jun 15, 2018 6:25 pm
- Contact:
Re: Starting parts
There was already a file of a coupling made with Part but it seems necessary to update it to version 0.18 and lock it with Part Design and be able to use it in some assembly, later I upload the one from 5mm to 8mm
Disponible en https://github.com/berserkdesign/FreeCA ... s/Coupling
Disponible en https://github.com/berserkdesign/FreeCA ... s/Coupling
Observa mi poderosa mano
- Berserk design
- Posts: 57
- Joined: Fri Jun 15, 2018 6:25 pm
- Contact:
- Berserk design
- Posts: 57
- Joined: Fri Jun 15, 2018 6:25 pm
- Contact:
- Berserk design
- Posts: 57
- Joined: Fri Jun 15, 2018 6:25 pm
- Contact:
- Berserk design
- Posts: 57
- Joined: Fri Jun 15, 2018 6:25 pm
- Contact:
Re: Starting parts
Observa mi poderosa mano