[solved] Can't run buckling analysis in 0.20
Moderator: bernd
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
[solved] Can't run buckling analysis in 0.20
Hi,
previously, when I was trying to submit the analysis in 0.20, I was receiving "No CalculiX binary ccx" error each time: https://forum.freecadweb.org/viewtopic.php?f=18&t=60951
Now in the newest weekly build there's no such issue but I can't run buckling analysis successfully and it happens on 2 different computers. There's no pop-up window with error message, just some red-colored output in the Report View:
and FreeCAD hangs completely (I have to kill it with Task Manager).
I also tried running this type of analysis with "Solver CalculiX (new framework) and it completes but the results seem empty.
OS: Windows 10 Version 2009
Word size of FreeCAD: 64-bit
Version: 0.20.25541 (Git)
Build type: Release
Branch: master
Hash: ca043dcb6d20d70b8e24d75e810683214eecc5d4
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: Polish/Poland (pl_PL)
previously, when I was trying to submit the analysis in 0.20, I was receiving "No CalculiX binary ccx" error each time: https://forum.freecadweb.org/viewtopic.php?f=18&t=60951
Now in the newest weekly build there's no such issue but I can't run buckling analysis successfully and it happens on 2 different computers. There's no pop-up window with error message, just some red-colored output in the Report View:
and FreeCAD hangs completely (I have to kill it with Task Manager).
I also tried running this type of analysis with "Solver CalculiX (new framework) and it completes but the results seem empty.
OS: Windows 10 Version 2009
Word size of FreeCAD: 64-bit
Version: 0.20.25541 (Git)
Build type: Release
Branch: master
Hash: ca043dcb6d20d70b8e24d75e810683214eecc5d4
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: Polish/Poland (pl_PL)
-
- Veteran
- Posts: 3156
- Joined: Sat May 20, 2017 12:06 pm
- Location: Germany
Re: Can't run buckling analysis in 0.20
I get this with
OS: Windows 10 Version 1909
Word size of FreeCAD: 64-bit
Version: 0.20.25541 (Git)
Build type: Release
Branch: master
Hash: ca043dcb6d20d70b8e24d75e810683214eecc5d4
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: German/Germany (de_DE)
OS: Windows 10 Version 1909
Word size of FreeCAD: 64-bit
Version: 0.20.25541 (Git)
Build type: Release
Branch: master
Hash: ca043dcb6d20d70b8e24d75e810683214eecc5d4
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: German/Germany (de_DE)
Re: Can't run buckling analysis in 0.20
@Thomas
The same here..
OS: Windows 10 Version 2004
Word size of FreeCAD: 64-bit
Version: 0.20.25541 (Git)
Build type: Release
Branch: master
Hash: ca043dcb6d20d70b8e24d75e810683214eecc5d4
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: German/Germany (de_DE)
The same here..
OS: Windows 10 Version 2004
Word size of FreeCAD: 64-bit
Version: 0.20.25541 (Git)
Build type: Release
Branch: master
Hash: ca043dcb6d20d70b8e24d75e810683214eecc5d4
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: German/Germany (de_DE)
- Attachments
-
- buckling-test.jpg (559.34 KiB) Viewed 2844 times
Re: Can't run buckling analysis in 0.20
it seams this is a problem of the calculix binary and not inside FreeCAD. ccxtools and calculix new solver framework eventually use the same ccx binary. See this topic suggested links.NewJoker wrote: ↑Thu Sep 02, 2021 4:26 pm Hi,
previously, when I was trying to submit the analysis in 0.20, I was receiving "No CalculiX binary ccx" error each time: https://forum.freecadweb.org/viewtopic.php?f=18&t=60951
Now in the newest weekly build there's no such issue but I can't run buckling analysis successfully and it happens on 2 different computers. There's no pop-up window with error message, just some red-colored output in the Report View:
error.JPG
and FreeCAD hangs completely (I have to kill it with Task Manager).
I also tried running this type of analysis with "Solver CalculiX (new framework) and it completes but the results seem empty.
Re: Can't run buckling analysis in 0.20
We should get rid of this. Would you report back if you succeeded with a alternate ccx binary? Which FreeCAD did you download?
Re: Can't run buckling analysis in 0.20
this was only meant as confirmation about what Thomas wrote, with my local computer..
I used his file beullast_zylinder, started buckling and had the same messages as thomas...
also with "INTEL MKL ERROR: Das angegebene Modul wurde nicht gefunden. mkl_intel_thread.dll. "
and the message about Nodecount
Last edited by cad1234 on Fri Sep 03, 2021 11:34 am, edited 2 times in total.
Re: Can't run buckling analysis in 0.20
I tried using ccx_PARDISO downloaded from the CalculiX's homepage (newest release), placed in FreeCAD's bin folder and selected in Preferences --> FEM --> CalculiX --> CalculIX binary but I got errors saying: "FEM: wrong ccx binary", "FEM: CalculiX binary ccx ... not found. Please set the CalculiX binary ccx path in FEM preferences tab CalculiX" and "CalculiX has not been run. The CalculiX binary search returned: False.".
To get the newest FreeCAD weekly build I downloaded this file:
https://github.com/FreeCAD/FreeCAD-Bund ... -x86-64.7z
Re: Can't run buckling analysis in 0.20
Got result with:
So, no problem now?
Code: Select all
OS: Windows 10 (10.0)
Word size of FreeCAD: 64-bit
Version: 0.21.29485 (Git)
Build type: Release
Branch: master
Hash: a236ca843fdd6674afb6d7ed1454fbd3b547f5ea
Python 3.8.13, Qt 5.12.9, Coin 4.0.0, Vtk 9.1.0, OCC 7.5.3
Locale: English/United States (en_US)
Re: Can't run buckling analysis in 0.20
This is not FreeCAD 0.20.0 final. You must use at least this version.
In your error message you also see that an outdated LibPack was used. This had some issues with third-party libraries like CCX and others.
-----------
FC 0.20.1 will come out this week and comes with massive fixes for FEM.