Hi,
New to using FreeCAD
I cannot seem to add holding tags to either the outside edge or the inner pocket
File letterbox guide V3.FCStd
Any guidance or help would be appreciated
FreeCAD-0.20-1
iMac (Retina 5K, 27-inch, 2020)
macOS Monterey Version 12.6
Material: 5mm perspex sheet 320x250mm
Requirements:
Panel size 300x200mm
Pocket cutout 278x60mm ThroughAll (needs to be a smooth edge)
2 x M3 countersunk holes thru
Regards
John
holding tags
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
holding tags
- Attachments
-
- letterbox guide V3.FCStd
- (53.47 KiB) Downloaded 15 times
Re: holding tags
It works here, if I remove the holes from the profile. Mill them in a separate operation.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: holding tags
I can also set them manually. You may try the current 0.21 version.
Code: Select all
OS: macOS 10.16
Word size of FreeCAD: 64-bit
Version: 0.21.30430 (Git)
Build type: Release
Branch: master
Hash: 9e1ed4a68ad43309c2b38f7f5efbb1feac4323cb
Python 3.10.6, Qt 5.15.4, Coin 4.0.0, Vtk 9.1.0, OCC 7.6.3
Locale: C/Default (C)
Installed mods:
* FC_SU
* FeedsAndSpeeds 0.4.0
* fcgear 1.0.0
* fasteners 0.4.6
* sheetmetal 0.2.57
* ExplodedAssembly
* Curves 0.5.8
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.