I would to mill some holes in an alu-plate by using the helix-path.
Quite strangerly, I cannot tune the step-over of the helix (i.e. the inclination of path while digging into the material).
I created a simple plate by using the Path Workbench for posting it here as an example... and I discovered a second problem also: I cannot apply the helix-path to all of the three holes.
I do not know the reason, but even if I select the circle at the bottom of the third hole, the Path workbench generate the toolpath only for the first two holes:
About the step-over: the GUI dialog pop-up with 1% as default, I tried all values from 1 to 100, but the toolpath doesn't change.
What's going on?
I attach the example file.
Code: Select all
OS: Ubuntu 16.04.7 LTS (XFCE/xfce)
Word size of FreeCAD: 64-bit
Version: 0.20.28647 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 1c1743b)
Hash: 1c1743b67d209f2b6501de4f75645a33b69d1c31
Python 3.9.12, Qt 5.12.9, Coin 4.0.0, OCC 7.5.3
Locale: English/United States (en_US) [ OS: English/United States (en_US) ]
Installed mods:
* fasteners 0.3.40
* A2plus 0.4.56
* toSketch