Gear Workbench

Este foro es para preguntas y debates en Español
Forum rules
reglas del foro e información útil

IMPORTANTE: Por favor leer antes de solicitar ayuda
Post Reply
caco2021
Posts: 15
Joined: Thu Dec 16, 2021 4:26 pm

Gear Workbench

Post by caco2021 »

Hola, buenas tardes,

Usando el Gear workbench, cambia la silueta de los dientes según el nº de dientes sea igual o menor a 60, o si es mayor de 60.
Esto es un problema si hay que combinar engranajes.




OS: Windows 10 Version 2009
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.24291 (Git)
Build type: Release
Branch: releases/FreeCAD-0-19
Hash: 7b5e18a0759de778b74d3a5c17eba9cb815035ac
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: Spanish/Argentina (es_AR)
Attachments
Gear2.jpg
Gear2.jpg (237.88 KiB) Viewed 548 times
Gear1.jpg
Gear1.jpg (237.62 KiB) Viewed 548 times
User avatar
looo
Veteran
Posts: 3825
Joined: Mon Nov 11, 2013 5:29 pm

Re: Gear Workbench

Post by looo »

That's a deviation issue. Please try to set the deviation to a smaller value, either via preferences/ partdesign or via the viewproperties
caco2021
Posts: 15
Joined: Thu Dec 16, 2021 4:26 pm

Re: Gear Workbench

Post by caco2021 »

Thank you! It was the problem.
Post Reply