FreeCAD (& free CAE) User Conference 2023 Announcement

[Varnu01]

It is with great pleasure to announce the date of the first Annual FreeCAD (and Free CAE) Users Conference.

Please see the following links for prior communication on this: 1 2 3

You can register here for the event. It will be fully online and free of charge.

I have also the attached the event schedule and the speaker line up

If you have any questions feel free to message me. I hope to see you all there!!

Regards
Varnu

[M4x]

Are you going to record the talks?

[Varnu01]

Are you going to record the talks?

Hi, thank you for the question.

Yes, all talks will be recorded and made available afterwards. In addition to this, we will make additional content available including tutorials, videos and other documents relating to each workbench presented.

[hlg]

Is registration still possible? Unfortunately I am not able to get it working.

On the hopin event page top I see "Now live! Are you attending? Enter event". When I reach the actual registration page, there is one option ("Free") which is however marked as "Closed". When I am logged in to Hopin I don't even get there but just see some short-lived information on top.

Mabe there is some configuration issue with the event? Like having set a wrong event status or similar?

[app4soft]

Are you going to record the talks?

Yes, all talks will be recorded and made available afterwards. In addition to this, we will make additional content available including tutorials, videos and other documents relating to each workbench presented.

Would video recordings of Day 1 be available today?

[Varnu01]

Hi all!

This forum message serves to wrap up the inaugural FreeCAD (& free CAE) Users Conference.

Thank you to everyone who made it happen, the speakers, the audience, the sponsors and the various stakeholders grilling me with questions since February last year, you are all appreciated!

All the conference material has been made available by clicking here.

There has been various forums that have been reignited as a result of the presentations and I believe the creators are active on their various forums answering questions.

The roadmap for consolidating post-conference is as follows:

• I am awaiting admin rights for my own page on the FreeCAD Wiki. There I will upload all the material, including additional material that was presented by the creators. The vision is that we can keep this page active and constantly update after each conference, hence the need for a section on the Wiki and not the forum where things can become cluttered.
• Work for the next conference is already underway as per @Karolis's closing speech. More announcements will follow in due course on that. In the mean time, we are taking suggestions on the way forward from the community.

As usual, if you have any queries or concerns. Please feel free to pm me here or drop me an email (govender.v@tuks.co.za)

Thank you to everyone once again for supporting us in this.

Regards
Varnu Govender

[galou_breizh]

Thanks for sharing!

I didn't find @Zoltan 's presentation about Assembly4.

[chrisb]

...

Please avoid cross postings, this isn't a developer topic so I lock it.

Continue further discussion here: viewtopic.php?t=73092.