It is doable with SSB's, use an offset equal to the width of the cut face (-10mm) for the path.
Select the profile SSB in the 3D view then the tool, hide the pad and select the edges for the path from the path SSB.
Search found 4250 matches
- Wed Apr 10, 2024 7:13 am
- Forum: Help on using FreeCAD
- Topic: PartDesign - SubtractivePipe - ShapeBinder
- Replies: 13
- Views: 646
- Wed Apr 10, 2024 6:51 am
- Forum: Help on using FreeCAD
- Topic: polar array
- Replies: 13
- Views: 754
Re: polar array
Change the rotation axis.....
- Tue Apr 09, 2024 7:04 pm
- Forum: Help on using FreeCAD
- Topic: [Solved] sketch: Center Line and symmetry
- Replies: 5
- Views: 468
Re: sketch: Center Line and symmetry
Applying symmetry constraint will cause an over-constraint situation, there are only 3 degrees of freedom left, the length of the lines and the distance from the axis. If the symmetry is required, delete the horizontal constraint on the three top points..... An added note if there is symmetry use it...
- Tue Apr 09, 2024 4:30 pm
- Forum: Help on using FreeCAD
- Topic: Boolean operation modifies PartDesign AdditivePipe
- Replies: 13
- Views: 645
Re: Boolean operation modifies PartDesign AdditivePipe
If it's any use I was able to get close in Part wb.....
- Tue Apr 09, 2024 2:52 pm
- Forum: Help on using FreeCAD
- Topic: how to make polar pattern from pockets around cylinder
- Replies: 17
- Views: 2438
Re: how to make polar pattern from pockets around cylinder
Don't hesitate to ask for more help.
- Tue Apr 09, 2024 5:44 am
- Forum: Help on using FreeCAD
- Topic: "make independent copy ...." issue adding body
- Replies: 18
- Views: 1082
Re: "make independent copy ...." issue adding body
The point you may be missing is that if you can build a shape in a solid, it can be built in void also.
In fact this is exactly how PD works it simply abstracts the bools from the user.
In fact this is exactly how PD works it simply abstracts the bools from the user.
- Tue Apr 09, 2024 5:10 am
- Forum: Help on using FreeCAD
- Topic: how to make polar pattern from pockets around cylinder
- Replies: 17
- Views: 2438
Re: how to make polar pattern from pockets around cylinder
Did you read the link I posted? If so what did you not understand? Perhaps this will help:- PartDesign Body If you wish to use PartDesign tools they only operate on a Body, that body must contain a solid, unless the operation is the first one, then it must be an additive tool. Else you must create s...
- Tue Apr 09, 2024 5:02 am
- Forum: Help on using FreeCAD
- Topic: "make independent copy ...." issue adding body
- Replies: 18
- Views: 1082
Re: "make independent copy ...." issue adding body
There is nothing wrong with cutting parts from parts.
JUST DON'T USE PARTDESIGN WORKBENCH.
JUST DON'T USE PARTDESIGN WORKBENCH.
- Mon Apr 08, 2024 9:16 pm
- Forum: Help on using FreeCAD
- Topic: how to make polar pattern from pockets around cylinder
- Replies: 17
- Views: 2438
- Mon Apr 08, 2024 6:25 am
- Forum: Help on using FreeCAD
- Topic: [Assembly 4]:can't create needed coordinate system on a circular surface
- Replies: 11
- Views: 763