Greetings to the Community! I didn't have any particular difficulties in dimensioning the axonometric (trimetric) view, I must say that the 3D dimensioning behaves well by automatically calculating and inserting the real dimension in the dimension, obviously (because in an arbitrary format) the decr...

how do I move the Sketch on Surface into the Body to produce a printable stl file Greetings to the Community! markaus Keeping your original file unchanged (modeling flow), follow these simple steps: - go to the "Part" workbench - select (from the Tree View) both objects: "Body" ...

Un saluto alla Comunità! duffy55 Velocemente uno dei tantissimi flussi realizzabili in FreeCAD, utilizzando il wb "Part Design" ma si può ottenere anche con "Part" oppure con il wb Dodo/Flamingo (più specialistico per questo genere). L'esempio allegato prevede un tubo modificabil...

Greetings to the Community! andrejsstrumfs You can do everything in wb "Part Design", map all the sketches, create the sphere with the "Create an additive primitive" function, finally do a "Groove" to eliminate the unwanted part of the sphere. Attached is your file appl...

If it is really that simple, I wonder if it is worth a feature request for Draft, to add a 3-point circle as a drop down button to the standard circle one. It sounds like the code for three point arc could be re-used with just one additional step (setting Last Angle = First Angle) at the end (and m...

Greetings to the Community! As can be seen in the attached image, the two arcs, which refer to the same 3 points, traced using the "Create primitives..." functions of the wb "Part" (white color) and "Arc by 3 points" of the wb "Draft" (blue color), show differ...

Greetings to the Community!
@Workshop Notes
....of course it's faster

Greetings to the Community!
@IsmaelE
The reason for the problem you are experiencing is highlighted in the attached image

Greetings to the Community!
@jayd
The gif shows how to create, with the "Draft" wb tools, a circle using three points/vertices positioned in any case.

Un saluto alla Comunità! Fede-rico ... Per riportare in mm lascia le dimensioni in nm chiudi lo sketcher, poi seleziona lo Sketch dalla vista ad albero, vai sulle "Proprietà" --> "Dati" --> sezione Sketch e modifica, dal parametro "Constraints", i nm in mm fai un ricalc...