Sind die Gewinde auch gleich detailliert? Details machen Datei groß und fressen im allgemeinen auch Ressourcen. Grüße user1234 Ja, die Gewinde sind alle gleich groß Nicht gleich groß, gleich detailliert. Wenn z.B. statt ein Radius am Gewinde eine Flachstelle ist als Näherung ist, macht das in der G...

hammax wrote: ↑Tue Apr 16, 2024 9:52 am from European sight it seems only to be slow during night and forenoon.

Yesterday and a few days before it was also slow during the day in Eurozone.


Greetings
user1234

SO--I am assuming the answer is NO----the method I show is the best method. No, it is, independent from TNP, a bad method and brittle af. When you change the topology of the former sketch, a working TN would you help here also not, because it is changed. Also an attachment which is not full defined...

Es ist ja schön, dass PD-Hole jetzt auch Gewinde darstellen kann. Leider wird die Datei dabei sehr groß (1.845 Kb). Für eine Anordnung mit volle eine Gewindegeometrie kommt mir das gar nicht groß vor. Meine Frage ist nun: Habe ich irgendwo einen Denkfehler? Sind die Gewinde auch gleich detailliert?...

First is an unwanted errant line in my Sheet 3 drawing that I do not want. I can not locate the source of the line. I do not know how to eliminate it. With a double click on the line you can edit it. Here you can set it invisible. I get these things also on bigger drawings. But also saw these thing...

Thanks grandcross . I see, i have mis-clicked in the topic, it should be in https://forum.freecad.org/viewtopic.php?t=78242 . In general such a material handler as object or similar is very common. If there's something specific you'd like to see create a feature request. It must be more precise spec...

It is since days slow again. Could it be, that the forum gets DDoS attacks (again)? I saw some odd behaviors (e.g. multiple due presumably scripts very similar users).

Greetings
user1234

There were some issues.

See viewtopic.php?t=86738 Thanks to @wmayer it works again on 0.22.36863 (git commit 87839c9f8bfd87b2363b6234aafd9e84ce0cc361) again.


Greetings
user1234

It depends on the usecase, but FreeCAD is relative frugal with resources. When you do many with FEM or patterns/arrays or many TechDraw views, more CPUs are indeed helpful. When do you do many with FEM or meshes, then you need more RAM. When you do assemblies with 1000 parts+ (meant is every here si...

Yosyp wrote: ↑Wed Feb 28, 2024 3:16 pm CMake can't find Coin3D documentation.

That is a long time issue. There was a time, where in the cmake log output was written, that coin was not found (but was installed) and also compiled fine. Since the doc does not do anything (as far as i know), i would not bother it.


Greetings
user1234