Search found 4277 matches
- Wed Apr 24, 2024 6:43 pm
- Forum: Help on using FreeCAD
- Topic: Engraving using a sketch
- Replies: 1
- Views: 36
Re: Engraving using a sketch
That sketch is not good for a path, it needs to be broken down into several. One can be the outer rim, then each of the spokes should be separate. Don't worry there is no need to draw each again, just use Sketcher Carbon copy and toggle the unwanted lines to construction. The same can be done with t...
- Wed Apr 24, 2024 6:31 pm
- Forum: Help on using FreeCAD
- Topic: question about fillet...
- Replies: 14
- Views: 440
Re: question about fillet...
I assume that means I use sketches that are attached to datum planes instead of sketches 'on surface'. No, Sketches can be attached in exactly the same way as DP's. Attaching a DP to a face is as bad as attaching a sketch. Attach to Std planes or other sketches and use attachment offset/expressions.
- Wed Apr 24, 2024 11:49 am
- Forum: Help on using FreeCAD
- Topic: Joining two sketches gives an unwanted result
- Replies: 12
- Views: 390
Re: Joining two sketches gives an unwanted result
How many videos have you seen that recommend joining sketches together?
Make a sketch, Pad it. Then mirror the pad. Easy.
Make a sketch, mirror it and then join it to some thing else, not easy!
Which would you say is the best way to go?
Make a sketch, Pad it. Then mirror the pad. Easy.
Make a sketch, mirror it and then join it to some thing else, not easy!
Which would you say is the best way to go?
- Tue Apr 23, 2024 9:22 pm
- Forum: Help on using FreeCAD
- Topic: Is it possible to constrain parts of a sketch to an external primitive?
- Replies: 3
- Views: 192
- Tue Apr 23, 2024 9:14 pm
- Forum: Help on using FreeCAD
- Topic: MultiTransform on PolarPattern → Traceback
- Replies: 6
- Views: 225
Re: MultiTransform on PolarPattern → Traceback
I've tried but it never works.......
- Tue Apr 23, 2024 8:57 pm
- Forum: Help on using FreeCAD
- Topic: question about fillet...
- Replies: 14
- Views: 440
Re: question about fillet...
Here's another way....
- Tue Apr 23, 2024 8:11 pm
- Forum: Help on using FreeCAD
- Topic: question about fillet...
- Replies: 14
- Views: 440
- Tue Apr 23, 2024 7:40 pm
- Forum: Help on using FreeCAD
- Topic: Joining two sketches gives an unwanted result
- Replies: 12
- Views: 390
Re: Joining two sketches gives an unwanted result
Don't join sketches.
Do this in the solid.
FC is a solid modeller, stop messing around with sketches, keep them simple and add/subtract from solids.....
Do this in the solid.
FC is a solid modeller, stop messing around with sketches, keep them simple and add/subtract from solids.....
- Tue Apr 23, 2024 2:52 pm
- Forum: Help on using FreeCAD
- Topic: Pocket goes away when I add polar array
- Replies: 5
- Views: 203
- Tue Apr 23, 2024 2:42 pm
- Forum: Help on using FreeCAD
- Topic: MultiTransform on PolarPattern → Traceback
- Replies: 6
- Views: 225
Re: MultiTransform on PolarPattern → Traceback
I think this is a bug, it should be possible according to the wiki.
https://wiki.freecad.org/PartDesign_Mul ... formations
https://wiki.freecad.org/PartDesign_Mul ... formations