I'd not look for the whole plethora of cross-app-stuff that full-fledged spread sheets collect under "paste special". I understand what you are trying to do but I think you need to understand how the paste special, values is done in other applications (e.g. LibreOffice) before trying to i...

To the best of my knowledge, in order to have a 'paste special', the application/Workbench has to put the 'special' onto the clipboard in the first place. I do not know if you have any way of examining what goes onto the clipboard on your system when you do a 'cut' or 'copy'. It would be instructive...

We are eager to hear your thoughts and suggestions. 1. Do not put your models in a place that requires registration (GrabCAD) 2. Do not promote a service that also requires registration (your own site) Please upload the FreeCAD model of your flange generated by your system onto this forum so we can...

Proof of the pudding is in the eating. Please, gNucleusAI, command your botty and you yourself upload the FreeCAD file for the weld neck flange using the exact dimensions shown in your screenshot. Note that your Y dimension is smaller than your C dimension. The weld neck flange is a good example: th...

How should such a button behave when Sketcher ToggleConstruction is clicked without having an element selected? Right now (0.21.1), the point button alone among the Sketcher buttons is immune/agnostic to the ToggleConstruction button and as you say, the only way you can toggle a point is to select ...

The three files you have uploaded do not contain any dimensions or text. Look at the file size. Open the file in Notepad or similar and read through it. You do not need to understand dxf to gain a rough idea of what is in the files (if you think the file should contain "fred" as text and &...

It can always be a preference to satisfy everyone. Could it be a cascading sticky button (is that the correct term?) like the two modes of arc creation and the two modes of circle creation? In both those cases, the icon changes according to the option selected, so the point could turn from red to b...

If the cross and the teeth are in the same sketch, you have to redraw one or the other at the correct angle relative to the one or the other. It would be easier to put the cross and the teeth into two different sketches. Then you can rotate the sketch itself. For what you show, it would be easiest t...

Where can I check the naming conventions? This is about as close as you can get: https://wiki.freecad.org/Property_editor#Scripting "Properties follow the CapitalCamelCase or PascalCase convention, meaning that each word starts with a capital letter, and there are no underscores. When the prop...

I think he is saying he wants to slice off or chamfer the edge of the metal so it butts tightly to the piece above.

The FreeCAD equivalent of an angle grinder.

Draw a rectangular sketch where the orange and blue lines are its top and bottom edges and pocket through all.